[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v4 2/3] dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
From: Palmer Dabbelt <>

Add documentation for the SiFive implementation of the RISC-V Platform
Level Interrupt Controller (PLIC). The PLIC connects global interrupt
sources to the local interrupt controller on each hart.

Signed-off-by: Palmer Dabbelt <>
[hch: various fixes and updates]
Signed-off-by: Christoph Hellwig <>
.../interrupt-controller/sifive,plic.txt | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt
new file mode 100644
index 000000000000..fe7ccd944c12
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt
@@ -0,0 +1,58 @@
+SiFive Platform-Level Interrupt Controller (PLIC)
+SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
+(PLIC) high-level specification in the RISC-V Privileged Architecture
+specification. The PLIC connects all external interrupts in the system to all
+hart contexts in the system, via the external interrupt source in each hart.
+A hart context is a privilege mode in a hardware execution thread. For example,
+in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+privilege modes per hart; machine mode and supervisor mode.
+Each interrupt can be enabled on per-context basis. Any context can claim
+a pending enabled interrupt and then release it once it has been handled.
+Each interrupt has a configurable priority. Higher priority interrupts are
+serviced first. Each context can specify a priority threshold. Interrupts
+with priority below this threshold will not cause the PLIC to raise its
+interrupt line leading to the context.
+While the PLIC supports both edge-triggered and level-triggered interrupts,
+interrupt handlers are oblivious to this distinction and therefore it is not
+specified in the PLIC device-tree binding.
+While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+"sifive,plic" device is a concrete implementation of the PLIC that contains a
+specific memory layout, which is documented in chapter 8 of the SiFive U5
+Coreplex Series Manual <>.
+Required properties:
+- compatible : "sifive,plic" and a string identifying the actual detailed
+ implementation in case that specific bugs need to be worked around.
+- #address-cells : should be <0> or more.
+- #interrupt-cells : should be <1> or more.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- reg : Should contain 1 register range (address and length).
+- interrupts-extended : Specifies which contexts are connected to the PLIC,
+ with "-1" specifying that a context is not present. Each node pointed
+ to should be a riscv,cpu-intc node, which has a riscv node as parent.
+- riscv,ndev: Specifies how many external interrupts are supported by
+ this controller.
+ plic: interrupt-controller@c000000 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ compatible = "riscv,plic", "sifive,fu540-c000-plic";
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0-intc 11
+ &cpu1-intc 11 &cpu1-intc 9
+ &cpu2-intc 11 &cpu2-intc 9
+ &cpu3-intc 11 &cpu3-intc 9
+ &cpu4-intc 11 &cpu4-intc 9>;
+ reg = <0xc000000 0x4000000>;
+ riscv,ndev = <10>;
+ };
 \ /
  Last update: 2018-08-09 09:56    [W:0.071 / U:10.640 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site