lkml.org 
[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 03/11] dt-bindings: interrupt-controller: RISC-V PLIC documentation
On Wed, Aug 08, 2018 at 11:29:17PM -0700, Palmer Dabbelt wrote:
>> So I guess to answer my question, you are just making up version
>> numbers. Unless you are doing the IP verilog too, don't do that.
>
> Well, in this case my proposal would be that we change the hardware team's
> versioning scheme to match whatever we decide on the versioning scheme
> should be as a part of this discussion. I proposed accepting whatever
> versioning scheme is decided upon hereto the hardware team before
> discussing changing the naming scheme and they agreed to do so.
>
> So we're really in the drivers' seat here.
>
>> If you want to use just 'sifive,plic' then I'm fine with that. I've
>> given you the potential problems with that and they will be your
>> problems to deal with. Maybe you'll get lucky. Plus it won't be a
>> problem for the 1st implementation.
>
> I'd prefer to have some versioning scheme, that's why I'm talking so much
> about this :). I really just want to learn how to get the right one, as
> I'm quite new to all this and we'll have many of these.

Based on the discussion so far I think we should settle for sifive,plic +
an actual implementation string suggested by Palmer and Andrew.

This is what I have right now:

http://git.infradead.org/users/hch/riscv.git/commitdiff/1972707029f8f1216dbe14bd7791295e4b37f560

and which I'd like to send out before it is too late.

\
 
 \ /
  Last update: 2018-08-09 08:39    [W:0.047 / U:0.924 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site