lkml.org 
[lkml]   [2018]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] dt: bindings: lm3697: Add bindings for lm3697 driver
From
Date
Hi Dan,

On 08/08/2018 11:04 PM, Dan Murphy wrote:
> On 08/08/2018 04:02 PM, Pavel Machek wrote:
>> Hi!
>>
>>>>> + - #size-cells : 0
>>>>> + - control-bank-cfg - : Indicates which sink is connected to which control bank
>>>>> + 0 - All HVLED outputs are controlled by bank A
>>>>> + 1 - HVLED1 is controlled bank B, HVLED2/3 are controlled by bank A
>>>>> + 2 - HVLED2 is controlled bank B, HVLED1/3 are controlled by bank A
>>>>> + 3 - HVLED1/2 are controlled by bank B, HVLED3 is controlled by bank A
>>>>> + 4 - HVLED3 is controlled by bank B, HVLED1/2 are controlled by bank A
>>>>> + 5 - HVLED1/3 is controlled by bank B, HVLED2 is controlled by bank A
>>>>> + 6 - (default) HVLED1 is controlled by bank A, HVLED2/3 are controlled by bank B
>>>>> + 7 - All HVLED outputs are controlled by bank B
>>>>
>>>> This is quite long way to describe a bitmask, no? Could we make
>>>> it so that control-bank-cfg is not needed?
>>>
>>> The problem we have here is there is a potential to control
>>> 3 different LED string but only 2 sinks. So control bank A can control 2 LED strings and control
>>> bank b can control 1 LED string.
>>>
>>
>> Can we forget about the LED strings, and just expose the sinks as
>> Linux LED devices?
>
> 2 sinks 3 LED strings. How do you know which LED string is which and what bank it belongs
> to when setting the brightness. Each Bank has a separate register for brightness control.

Just a blind shot, without going into details - could you please check
if led-sources property documented in the common LED bindings couldn't
help here?

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2018-08-08 23:11    [W:0.079 / U:4.632 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site