lkml.org 
[lkml]   [2018]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE
Date
While polling for BOOT_DONE the chip could NAK a read because it is
still booting, which would terminate the regmap_read_poll_timeout()
with an error.

Instead implement a polling loop that ignores read errors so we
always poll until the chip signals boot or the loop times out.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
drivers/mfd/madera-core.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)

diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
index 8cfea969b060..bc5545c53ee5 100644
--- a/drivers/mfd/madera-core.c
+++ b/drivers/mfd/madera-core.c
@@ -132,33 +132,43 @@ const char *madera_name_from_type(enum madera_type type)
}
EXPORT_SYMBOL_GPL(madera_name_from_type);

-#define MADERA_BOOT_POLL_MAX_INTERVAL_US 5000
-#define MADERA_BOOT_POLL_TIMEOUT_US 25000
+#define MADERA_BOOT_POLL_INTERVAL_USEC 5000
+#define MADERA_BOOT_POLL_TIMEOUT_USEC 25000

static int madera_wait_for_boot(struct madera *madera)
{
- unsigned int val;
- int ret;
+ ktime_t timeout;
+ unsigned int val = 0;
+ int ret = 0;

/*
* We can't use an interrupt as we need to runtime resume to do so,
* so we poll the status bit. This won't race with the interrupt
* handler because it will be blocked on runtime resume.
+ * The chip could NAK a read request while it is booting so ignore
+ * errors from regmap_read.
*/
- ret = regmap_read_poll_timeout(madera->regmap,
- MADERA_IRQ1_RAW_STATUS_1,
- val,
- (val & MADERA_BOOT_DONE_STS1),
- MADERA_BOOT_POLL_MAX_INTERVAL_US,
- MADERA_BOOT_POLL_TIMEOUT_US);
-
- if (ret)
- dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
+ regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
+ if (val & MADERA_BOOT_DONE_STS1)
+ goto done;
+
+ timeout = ktime_add_us(ktime_get(), MADERA_BOOT_POLL_TIMEOUT_USEC);
+ do {
+ usleep_range(MADERA_BOOT_POLL_INTERVAL_USEC / 2,
+ MADERA_BOOT_POLL_INTERVAL_USEC);
+ regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
+ if (val & MADERA_BOOT_DONE_STS1)
+ goto done;
+ } while (ktime_compare(ktime_get(), timeout) <= 0);
+
+ dev_err(madera->dev, "Polling BOOT_DONE_STS timed out\n");
+ ret = -ETIMEDOUT;

/*
* BOOT_DONE defaults to unmasked on boot so we must ack it.
- * Do this unconditionally to avoid interrupt storms.
+ * Do this even after a timeout to avoid interrupt storms.
*/
+done:
regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
MADERA_BOOT_DONE_EINT1);

--
2.11.0
\
 
 \ /
  Last update: 2018-08-07 11:09    [W:0.038 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site