lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] kdb: Remove special case logic from kdb_read()
Date
kdb_read() contains special case logic to force it exit after reading
a single character. We can remove all the special case logic by directly
calling the function to read a single character instead. This also
allows us to tidy up the function prototype which, because it now matches
getchar(), we can also rename in order to make its role clearer.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
---
kernel/debug/kdb/kdb_io.c | 56 ++++++++++++++++-----------------------
1 file changed, 23 insertions(+), 33 deletions(-)

diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 0ba490728459..f735d859f28b 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -106,7 +106,19 @@ static int kdb_read_handle_escape(char *buf, size_t sz)
return -1;
}

-static int kdb_read_get_key(char *buffer, size_t bufsize)
+/*
+ * kdb_getchar
+ *
+ * Read a single character from kdb console (or consoles).
+ *
+ * An escape key could be the start of a vt100 control sequence such as \e[D
+ * (left arrow) or it could be a character in its own right. The standard
+ * method for detecting the difference is to wait for 2 seconds to see if there
+ * are any other characters. kdb is complicated by the lack of a timer service
+ * (interrupts are off), by multiple input sources. Escape sequence processing
+ * has to be done as states in the polling loop.
+ */
+static int kdb_getchar(void)
{
#define ESCAPE_UDELAY 1000
#define ESCAPE_DELAY (2*1000000/ESCAPE_UDELAY) /* 2 seconds worth of udelays */
@@ -124,7 +136,6 @@ static int kdb_read_get_key(char *buffer, size_t bufsize)
}

key = (*f)();
-
if (key == -1) {
if (escape_delay) {
udelay(ESCAPE_UDELAY);
@@ -134,14 +145,6 @@ static int kdb_read_get_key(char *buffer, size_t bufsize)
continue;
}

- if (bufsize <= 2) {
- if (key == '\r')
- key = '\n';
- *buffer++ = key;
- *buffer = '\0';
- return -1;
- }
-
if (escape_delay == 0 && key == '\e') {
escape_delay = ESCAPE_DELAY;
ped = escape_data;
@@ -183,17 +186,7 @@ static int kdb_read_get_key(char *buffer, size_t bufsize)
* function. It is not reentrant - it relies on the fact
* that while kdb is running on only one "master debug" cpu.
* Remarks:
- *
- * The buffer size must be >= 2. A buffer size of 2 means that the caller only
- * wants a single key.
- *
- * An escape key could be the start of a vt100 control sequence such as \e[D
- * (left arrow) or it could be a character in its own right. The standard
- * method for detecting the difference is to wait for 2 seconds to see if there
- * are any other characters. kdb is complicated by the lack of a timer service
- * (interrupts are off), by multiple input sources and by the need to sometimes
- * return after just one key. Escape sequence processing has to be done as
- * states in the polling loop.
+ * The buffer size must be >= 2.
*/

static char *kdb_read(char *buffer, size_t bufsize)
@@ -228,9 +221,7 @@ static char *kdb_read(char *buffer, size_t bufsize)
*cp = '\0';
kdb_printf("%s", buffer);
poll_again:
- key = kdb_read_get_key(buffer, bufsize);
- if (key == -1)
- return buffer;
+ key = kdb_getchar();
if (key != 9)
tab = 0;
switch (key) {
@@ -738,7 +729,7 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)

/* check for having reached the LINES number of printed lines */
if (kdb_nextline >= linecount) {
- char buf1[16] = "";
+ char ch;

/* Watch out for recursion here. Any routine that calls
* kdb_printf will come back through here. And kdb_read
@@ -773,39 +764,38 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)
if (logging)
printk("%s", moreprompt);

- kdb_read(buf1, 2); /* '2' indicates to return
- * immediately after getting one key. */
+ ch = kdb_getchar();
kdb_nextline = 1; /* Really set output line 1 */

/* empty and reset the buffer: */
kdb_buffer[0] = '\0';
next_avail = kdb_buffer;
size_avail = sizeof(kdb_buffer);
- if ((buf1[0] == 'q') || (buf1[0] == 'Q')) {
+ if ((ch == 'q') || (ch == 'Q')) {
/* user hit q or Q */
KDB_FLAG_SET(CMD_INTERRUPT); /* command interrupted */
KDB_STATE_CLEAR(PAGER);
/* end of command output; back to normal mode */
kdb_grepping_flag = 0;
kdb_printf("\n");
- } else if (buf1[0] == ' ') {
+ } else if (ch == ' ') {
kdb_printf("\r");
suspend_grep = 1; /* for this recursion */
- } else if (buf1[0] == '\n') {
+ } else if (ch == '\n' || ch == '\r') {
kdb_nextline = linecount - 1;
kdb_printf("\r");
suspend_grep = 1; /* for this recursion */
- } else if (buf1[0] == '/' && !kdb_grepping_flag) {
+ } else if (ch == '/' && !kdb_grepping_flag) {
kdb_printf("\r");
kdb_getstr(kdb_grep_string, KDB_GREP_STRLEN,
kdbgetenv("SEARCHPROMPT") ?: "search> ");
*strchrnul(kdb_grep_string, '\n') = '\0';
kdb_grepping_flag += KDB_GREPPING_FLAG_SEARCH;
suspend_grep = 1; /* for this recursion */
- } else if (buf1[0] && buf1[0] != '\n') {
+ } else if (ch && ch != '\n') {
/* user hit something other than enter */
suspend_grep = 1; /* for this recursion */
- if (buf1[0] != '/')
+ if (ch != '/')
kdb_printf(
"\nOnly 'q', 'Q' or '/' are processed at "
"more prompt, input ignored\n");
--
2.17.1
\
 
 \ /
  Last update: 2018-08-31 22:53    [W:0.053 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site