lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] ARM: NSP updates to support switch interrupts/SFP
Date
Hi all,

This patch series updates the ARM NSP DTS and BCM958625HR in order to
support the SFP connected to port 5 on these reference boards.

I will be submitting the functional changes to drivers/net/dsa/b53 once
net-next opens back up, but this is largely independent from getting
these 3 patches out.

Thank you

Changes in v3:

- changes i2c controller node name from i2c to i2c (Ray)
- updated binding patch to have bulleted reg-names and interrupt-names
(Rob)


Changes in v2:

- added missing managed = "in-band-status" property
- reworded the commit message to explain the limitation of i2c-proc
is of 63 bytes per transfer, not 256 bytes

Florian Fainelli (3):
ARM: dts: NSP: Enable SFP on bcm958625hr
dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
ARM: dts: NSP: Wire up switch interrupts

.../devicetree/bindings/net/dsa/b53.txt | 36 +++++++++++++++++++
arch/arm/boot/dts/bcm-nsp.dtsi | 31 +++++++++++++++-
arch/arm/boot/dts/bcm958625hr.dts | 26 ++++++++++++++
3 files changed, 92 insertions(+), 1 deletion(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-08-31 21:23    [W:0.063 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site