lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] platform/x86: surface3_power: MSHW0011 rev-eng implementation
Date
The MSHW0011 device is a chip that replaces the battery firmware
by using ACPI operation regions on the Surface 3.
It is unclear whether or not the chip will be reused somewhere else
(under Windows, the chip is called "Surface Platform Power Driver"
and the driver is provided by Microsoft).

The values have been obtained by reverse engineering, and are subject to
errors. Looks like it works on overall pretty well.

I couldn't manage to get the IRQ correctly triggered, so I am using a
good old polling thread to check for changes. This is something
to be fixed in a later version.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=106231

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Stephen Just <stephenjust@gmail.com>

---

changes in v2:
- moved to drivers/acpi/ instead of power
- use uuid_le
- fix uper/lower case
- print_hex_dump() used in mshw0011_dump_registers() instead of custom dump
- removed "MSHW0011:00" in mshw0011_id

changes in v3:
- remove le16_to_cpu() after i2c_smbus_read_word_data() as it already
handles it properly
- use i2c_acpi_new_device() to remove a bunch of duplicated code from I2C
core.
- move the driver in platform/x86
- add depends ACPI && I2C in Kconfig
- remove the dump registers facility, as it's debugging only
- use of BIT() in MSHW0011 defs
- use of guid_t
- remove useless ret = 0
- use probe_new()
- remove empty .id_table
- removed mshw0011_i2c_read_block() and use directly
i2c_smbus_read_i2c_block_data()
- use snprintf() instead of custom memcpy()
- renamed the 'version' as 'mask'
- use SPDX license identifier
---
drivers/platform/x86/Kconfig | 7 +
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/surface3_power.c | 604 ++++++++++++++++++++++++++
3 files changed, 612 insertions(+)
create mode 100644 drivers/platform/x86/surface3_power.c

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ac4d48830415..c254f7aadbe1 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1158,6 +1158,13 @@ config SURFACE_3_BUTTON
---help---
This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet.

+config SURFACE_3_POWER_OPREGION
+ tristate "Surface 3 battery platform operation region support"
+ depends on ACPI && I2C
+ help
+ Select this option to enable support for ACPI operation
+ region of the Surface 3 battery platform driver.
+
config INTEL_PUNIT_IPC
tristate "Intel P-Unit IPC Driver"
---help---
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 2ba6cb795338..2f683597af9f 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
obj-$(CONFIG_SILEAD_DMI) += silead_dmi.o
obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
+obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o
obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
diff --git a/drivers/platform/x86/surface3_power.c b/drivers/platform/x86/surface3_power.c
new file mode 100644
index 000000000000..e0af01a60302
--- /dev/null
+++ b/drivers/platform/x86/surface3_power.c
@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Supports for the power IC on the Surface 3 tablet.
+ *
+ * (C) Copyright 2016-2018 Red Hat, Inc
+ * (C) Copyright 2016-2018 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * (C) Copyright 2016 Stephen Just <stephenjust@gmail.com>
+ *
+ */
+
+/*
+ * This driver has been reverse-engineered by parsing the DSDT of the Surface 3
+ * and looking at the registers of the chips.
+ *
+ * The DSDT allowed to find out that:
+ * - the driver is required for the ACPI BAT0 device to communicate to the chip
+ * through an operation region.
+ * - the various defines for the operation region functions to communicate with
+ * this driver
+ * - the DSM 3f99e367-6220-4955-8b0f-06ef2ae79412 allows to trigger ACPI
+ * events to BAT0 (the code is all available in the DSDT).
+ *
+ * Further findings regarding the 2 chips declared in the MSHW0011 are:
+ * - there are 2 chips declared:
+ * . 0x22 seems to control the ADP1 line status (and probably the charger)
+ * . 0x55 controls the battery directly
+ * - the battery chip uses a SMBus protocol (using plain SMBus allows non
+ * destructive commands):
+ * . the commands/registers used are in the range 0x00..0x7F
+ * . if bit 8 (0x80) is set in the SMBus command, the returned value is the
+ * same as when it is not set. There is a high chance this bit is the
+ * read/write
+ * . the various registers semantic as been deduced by observing the register
+ * dumps.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/acpi.h>
+#include <linux/freezer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+
+#define POLL_INTERVAL (2 * HZ)
+
+struct mshw0011_data {
+ struct i2c_client *adp1;
+ struct i2c_client *bat0;
+ unsigned short notify_mask;
+ struct task_struct *poll_task;
+ bool kthread_running;
+
+ bool charging;
+ bool bat_charging;
+ u8 trip_point;
+ s32 full_capacity;
+};
+
+struct mshw0011_lookup {
+ struct mshw0011_data *cdata;
+ unsigned int n;
+ unsigned int index;
+ int addr;
+};
+
+struct mshw0011_handler_data {
+ struct acpi_connection_info info;
+ struct i2c_client *client;
+};
+
+struct bix {
+ u32 revision;
+ u32 power_unit;
+ u32 design_capacity;
+ u32 last_full_charg_capacity;
+ u32 battery_technology;
+ u32 design_voltage;
+ u32 design_capacity_of_warning;
+ u32 design_capacity_of_low;
+ u32 cycle_count;
+ u32 measurement_accuracy;
+ u32 max_sampling_time;
+ u32 min_sampling_time;
+ u32 max_average_interval;
+ u32 min_average_interval;
+ u32 battery_capacity_granularity_1;
+ u32 battery_capacity_granularity_2;
+ char model[10];
+ char serial[10];
+ char type[10];
+ char OEM[10];
+} __packed;
+
+struct bst {
+ u32 battery_state;
+ s32 battery_present_rate;
+ u32 battery_remaining_capacity;
+ u32 battery_present_voltage;
+} __packed;
+
+struct gsb_command {
+ u8 arg0;
+ u8 arg1;
+ u8 arg2;
+} __packed;
+
+struct gsb_buffer {
+ u8 status;
+ u8 len;
+ u8 ret;
+ union {
+ struct gsb_command cmd;
+ struct bst bst;
+ struct bix bix;
+ } __packed;
+} __packed;
+
+
+#define ACPI_BATTERY_STATE_DISCHARGING BIT(0)
+#define ACPI_BATTERY_STATE_CHARGING BIT(1)
+#define ACPI_BATTERY_STATE_CRITICAL BIT(2)
+
+#define MSHW0011_CMD_DEST_BAT0 0x01
+#define MSHW0011_CMD_DEST_ADP1 0x03
+
+#define MSHW0011_CMD_BAT0_STA 0x01
+#define MSHW0011_CMD_BAT0_BIX 0x02
+#define MSHW0011_CMD_BAT0_BCT 0x03
+#define MSHW0011_CMD_BAT0_BTM 0x04
+#define MSHW0011_CMD_BAT0_BST 0x05
+#define MSHW0011_CMD_BAT0_BTP 0x06
+#define MSHW0011_CMD_ADP1_PSR 0x07
+#define MSHW0011_CMD_BAT0_PSOC 0x09
+#define MSHW0011_CMD_BAT0_PMAX 0x0a
+#define MSHW0011_CMD_BAT0_PSRC 0x0b
+#define MSHW0011_CMD_BAT0_CHGI 0x0c
+#define MSHW0011_CMD_BAT0_ARTG 0x0d
+
+#define MSHW0011_NOTIFY_GET_VERSION 0x00
+#define MSHW0011_NOTIFY_ADP1 0x01
+#define MSHW0011_NOTIFY_BAT0_BST 0x02
+#define MSHW0011_NOTIFY_BAT0_BIX 0x05
+
+#define MSHW0011_ADP1_REG_PSR 0x04
+
+#define MSHW0011_BAT0_REG_CAPACITY 0x0c
+#define MSHW0011_BAT0_REG_FULL_CHG_CAPACITY 0x0e
+#define MSHW0011_BAT0_REG_DESIGN_CAPACITY 0x40
+#define MSHW0011_BAT0_REG_VOLTAGE 0x08
+#define MSHW0011_BAT0_REG_RATE 0x14
+#define MSHW0011_BAT0_REG_OEM 0x45
+#define MSHW0011_BAT0_REG_TYPE 0x4e
+#define MSHW0011_BAT0_REG_SERIAL_NO 0x56
+#define MSHW0011_BAT0_REG_CYCLE_CNT 0x6e
+
+#define MSHW0011_EV_2_5 0x1ff
+
+static int
+mshw0011_notify(struct mshw0011_data *cdata, u8 arg1, u8 arg2,
+ unsigned int *ret_value)
+{
+ static const guid_t mshw0011_guid =
+ GUID_INIT(0x3F99E367, 0x6220, 0x4955,
+ 0x8B, 0x0F, 0x06, 0xEF, 0x2A, 0xE7, 0x94, 0x12);
+ union acpi_object *obj;
+ struct acpi_device *adev;
+ acpi_handle handle;
+ unsigned int i;
+
+ handle = ACPI_HANDLE(&cdata->adp1->dev);
+ if (!handle || acpi_bus_get_device(handle, &adev))
+ return -ENODEV;
+
+ obj = acpi_evaluate_dsm_typed(handle, &mshw0011_guid, arg1, arg2, NULL,
+ ACPI_TYPE_BUFFER);
+ if (!obj) {
+ dev_err(&cdata->adp1->dev, "device _DSM execution failed\n");
+ return -ENODEV;
+ }
+
+ *ret_value = 0;
+ for (i = 0; i < obj->buffer.length; i++)
+ *ret_value |= obj->buffer.pointer[i] << (i * 8);
+
+ ACPI_FREE(obj);
+ return 0;
+}
+
+static const struct bix default_bix = {
+ .revision = 0x00,
+ .power_unit = 0x01,
+ .design_capacity = 0x1dca,
+ .last_full_charg_capacity = 0x1dca,
+ .battery_technology = 0x01,
+ .design_voltage = 0x10df,
+ .design_capacity_of_warning = 0x8f,
+ .design_capacity_of_low = 0x47,
+ .cycle_count = 0xffffffff,
+ .measurement_accuracy = 0x00015f90,
+ .max_sampling_time = 0x03e8,
+ .min_sampling_time = 0x03e8,
+ .max_average_interval = 0x03e8,
+ .min_average_interval = 0x03e8,
+ .battery_capacity_granularity_1 = 0x45,
+ .battery_capacity_granularity_2 = 0x11,
+ .model = "P11G8M",
+ .serial = "",
+ .type = "LION",
+ .OEM = "",
+};
+
+static int mshw0011_bix(struct mshw0011_data *cdata, struct bix *bix)
+{
+ struct i2c_client *client = cdata->bat0;
+ char buf[10];
+ int ret;
+
+ *bix = default_bix;
+
+ /* get design capacity */
+ ret = i2c_smbus_read_word_data(client,
+ MSHW0011_BAT0_REG_DESIGN_CAPACITY);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error reading design capacity: %d\n",
+ ret);
+ return ret;
+ }
+ bix->design_capacity = ret;
+
+ /* get last full charge capacity */
+ ret = i2c_smbus_read_word_data(client,
+ MSHW0011_BAT0_REG_FULL_CHG_CAPACITY);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Error reading last full charge capacity: %d\n", ret);
+ return ret;
+ }
+ bix->last_full_charg_capacity = ret;
+
+ /* get serial number */
+ ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_SERIAL_NO,
+ 10, buf);
+ if (ret != 10) {
+ dev_err(&client->dev, "Error reading serial no: %d\n", ret);
+ return ret;
+ }
+ snprintf(bix->serial, ARRAY_SIZE(bix->serial),
+ "%*pE%*pE", 3, buf + 7, 6, buf);
+
+ /* get cycle count */
+ ret = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CYCLE_CNT);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
+ return ret;
+ }
+ bix->cycle_count = ret;
+
+ /* get OEM name */
+ ret = i2c_smbus_read_i2c_block_data(client, MSHW0011_BAT0_REG_OEM,
+ 4, buf);
+ if (ret != 4) {
+ dev_err(&client->dev, "Error reading cycle count: %d\n", ret);
+ return ret;
+ }
+ snprintf(bix->OEM, ARRAY_SIZE(bix->OEM), "%*pE", 3, buf);
+
+ return 0;
+}
+
+static int mshw0011_bst(struct mshw0011_data *cdata, struct bst *bst)
+{
+ struct i2c_client *client = cdata->bat0;
+ int rate, capacity, voltage, state;
+ s16 tmp;
+
+ rate = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_RATE);
+ if (rate < 0)
+ return rate;
+
+ capacity = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_CAPACITY);
+ if (capacity < 0)
+ return capacity;
+
+ voltage = i2c_smbus_read_word_data(client, MSHW0011_BAT0_REG_VOLTAGE);
+ if (voltage < 0)
+ return voltage;
+
+ tmp = rate;
+ bst->battery_present_rate = abs((s32)tmp);
+
+ state = 0;
+ if ((s32) tmp > 0)
+ state |= ACPI_BATTERY_STATE_CHARGING;
+ else if ((s32) tmp < 0)
+ state |= ACPI_BATTERY_STATE_DISCHARGING;
+ bst->battery_state = state;
+
+ bst->battery_remaining_capacity = capacity;
+ bst->battery_present_voltage = voltage;
+
+ return 0;
+}
+
+static int mshw0011_adp_psr(struct mshw0011_data *cdata)
+{
+ struct i2c_client *client = cdata->adp1;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, MSHW0011_ADP1_REG_PSR);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int mshw0011_isr(struct mshw0011_data *cdata)
+{
+ struct bst bst;
+ struct bix bix;
+ int ret;
+ bool status, bat_status;
+
+ ret = mshw0011_adp_psr(cdata);
+ if (ret < 0)
+ return ret;
+
+ status = ret;
+
+ if (status != cdata->charging)
+ mshw0011_notify(cdata, cdata->notify_mask,
+ MSHW0011_NOTIFY_ADP1, &ret);
+
+ cdata->charging = status;
+
+ ret = mshw0011_bst(cdata, &bst);
+ if (ret < 0)
+ return ret;
+
+ bat_status = bst.battery_state;
+
+ if (bat_status != cdata->bat_charging)
+ mshw0011_notify(cdata, cdata->notify_mask,
+ MSHW0011_NOTIFY_BAT0_BST, &ret);
+
+ cdata->bat_charging = bat_status;
+
+ ret = mshw0011_bix(cdata, &bix);
+ if (ret < 0)
+ return ret;
+ if (bix.last_full_charg_capacity != cdata->full_capacity)
+ mshw0011_notify(cdata, cdata->notify_mask,
+ MSHW0011_NOTIFY_BAT0_BIX, &ret);
+
+ cdata->full_capacity = bix.last_full_charg_capacity;
+
+ return 0;
+}
+
+static int mshw0011_poll_task(void *data)
+{
+ struct mshw0011_data *cdata = data;
+ int ret = 0;
+
+ cdata->kthread_running = true;
+
+ set_freezable();
+
+ while (!kthread_should_stop()) {
+ schedule_timeout_interruptible(POLL_INTERVAL);
+ try_to_freeze();
+ ret = mshw0011_isr(data);
+ if (ret)
+ break;
+ }
+
+ cdata->kthread_running = false;
+ return ret;
+}
+
+static acpi_status
+mshw0011_space_handler(u32 function, acpi_physical_address command,
+ u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+ struct mshw0011_handler_data *data = handler_context;
+ struct acpi_connection_info *info = &data->info;
+ struct acpi_resource_i2c_serialbus *sb;
+ struct i2c_client *client = data->client;
+ struct mshw0011_data *cdata = i2c_get_clientdata(client);
+ struct acpi_resource *ares;
+ u32 accessor_type = function >> 16;
+ acpi_status ret;
+ int status = 1;
+
+ ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+ if (ACPI_FAILURE(ret))
+ return ret;
+
+ if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ if (accessor_type != ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ if (gsb->cmd.arg0 == MSHW0011_CMD_DEST_ADP1 &&
+ gsb->cmd.arg1 == MSHW0011_CMD_ADP1_PSR) {
+ ret = mshw0011_adp_psr(cdata);
+ if (ret >= 0) {
+ status = ret;
+ ret = 0;
+ }
+ goto out;
+ }
+
+ if (gsb->cmd.arg0 != MSHW0011_CMD_DEST_BAT0) {
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ switch (gsb->cmd.arg1) {
+ case MSHW0011_CMD_BAT0_STA:
+ break;
+ case MSHW0011_CMD_BAT0_BIX:
+ ret = mshw0011_bix(cdata, &gsb->bix);
+ break;
+ case MSHW0011_CMD_BAT0_BTP:
+ cdata->trip_point = gsb->cmd.arg2;
+ break;
+ case MSHW0011_CMD_BAT0_BST:
+ ret = mshw0011_bst(cdata, &gsb->bst);
+ break;
+ default:
+ pr_info("command(0x%02x) is not supported.\n", gsb->cmd.arg1);
+ ret = AE_BAD_PARAMETER;
+ goto err;
+ }
+
+ out:
+ gsb->ret = status;
+ gsb->status = 0;
+
+ err:
+ ACPI_FREE(ares);
+ return ret;
+}
+
+static int mshw0011_install_space_handler(struct i2c_client *client)
+{
+ acpi_handle handle;
+ struct mshw0011_handler_data *data;
+ acpi_status status;
+
+ handle = ACPI_HANDLE(&client->dev);
+
+ if (!handle)
+ return -ENODEV;
+
+ data = kzalloc(sizeof(struct mshw0011_handler_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ status = acpi_bus_attach_private_data(handle, (void *)data);
+ if (ACPI_FAILURE(status)) {
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ status = acpi_install_address_space_handler(handle,
+ ACPI_ADR_SPACE_GSBUS,
+ &mshw0011_space_handler,
+ NULL,
+ data);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&client->dev, "Error installing i2c space handler\n");
+ acpi_bus_detach_private_data(handle);
+ kfree(data);
+ return -ENOMEM;
+ }
+
+ acpi_walk_dep_device_list(handle);
+ return 0;
+}
+
+static void mshw0011_remove_space_handler(struct i2c_client *client)
+{
+ acpi_handle handle = ACPI_HANDLE(&client->dev);
+ struct mshw0011_handler_data *data;
+ acpi_status status;
+
+ if (!handle)
+ return;
+
+ acpi_remove_address_space_handler(handle,
+ ACPI_ADR_SPACE_GSBUS,
+ &mshw0011_space_handler);
+
+ status = acpi_bus_get_private_data(handle, (void **)&data);
+ if (ACPI_SUCCESS(status))
+ kfree(data);
+
+ acpi_bus_detach_private_data(handle);
+}
+
+static int mshw0011_probe(struct i2c_client *client)
+{
+ struct i2c_board_info board_info;
+ struct device *dev = &client->dev;
+ struct i2c_client *bat0;
+
+ struct mshw0011_data *data;
+ int error, mask;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->adp1 = client;
+ i2c_set_clientdata(client, data);
+
+ memset(&board_info, 0, sizeof(board_info));
+ strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE);
+
+ bat0 = i2c_acpi_new_device(dev, 1, &board_info);
+ if (!bat0)
+ return -ENOMEM;
+
+ data->bat0 = bat0;
+ i2c_set_clientdata(bat0, data);
+
+ error = mshw0011_notify(data, 1, MSHW0011_NOTIFY_GET_VERSION, &mask);
+ if (error)
+ goto out_err;
+
+ data->notify_mask = mask == MSHW0011_EV_2_5;
+
+ data->poll_task = kthread_run(mshw0011_poll_task, data, "mshw0011_adp");
+ if (IS_ERR(data->poll_task)) {
+ error = PTR_ERR(data->poll_task);
+ dev_err(&client->dev, "Unable to run kthread err %d\n", error);
+ goto out_err;
+ }
+
+ error = mshw0011_install_space_handler(client);
+ if (error)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ if (data->kthread_running)
+ kthread_stop(data->poll_task);
+ i2c_unregister_device(data->bat0);
+ return error;
+}
+
+static int mshw0011_remove(struct i2c_client *client)
+{
+ struct mshw0011_data *cdata = i2c_get_clientdata(client);
+
+ mshw0011_remove_space_handler(client);
+
+ if (cdata->kthread_running)
+ kthread_stop(cdata->poll_task);
+
+ i2c_unregister_device(cdata->bat0);
+
+ return 0;
+}
+
+static const struct acpi_device_id mshw0011_acpi_match[] = {
+ { "MSHW0011", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, mshw0011_acpi_match);
+
+static struct i2c_driver mshw0011_driver = {
+ .probe_new = mshw0011_probe,
+ .remove = mshw0011_remove,
+ .driver = {
+ .name = "mshw0011",
+ .acpi_match_table = ACPI_PTR(mshw0011_acpi_match),
+ },
+};
+module_i2c_driver(mshw0011_driver);
+
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_DESCRIPTION("mshw0011 driver");
+MODULE_LICENSE("GPL v2");
--
2.17.0
\
 
 \ /
  Last update: 2018-08-31 17:19    [W:0.124 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site