lkml.org 
[lkml]   [2018]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 12/13] ARM: dts: sun4i: a10: add sata-port/sata-phy nodes
Date
This patch convert sun4i-a10 sata to the new binding which use a sata
phy node.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 3d62a8950720..52d5c2e79499 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -556,7 +556,20 @@
reg = <0x01c18000 0x1000>;
interrupts = <56>;
clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
+
+ sata_port: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy>;
+ };
+ };
+
+ sata_phy: sata_phy@1c180c0 {
+ compatible = "allwinner,sun4i-a10-sata-phy";
+ reg = <0x01c180c0 0x200>;
+ #phy-cells = <0>;
};

ehci1: usb@1c1c000 {
--
2.16.4
\
 
 \ /
  Last update: 2018-08-30 21:02    [W:0.150 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site