lkml.org 
[lkml]   [2018]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] serial: 8250_of: Fix for lack of interrupt support
From
Date
Hello John!

On 30/08/2018 11:08, John Garry wrote:
> In commit c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ"), a
> check was added for the UART driver being probed prior to the parent IRQ
> controller.
>
> Unfortunately this breaks certain boards which have no interrupt support,
> like Huawei D03.
>
> Indeed, the 8250 DT bindings state that interrupts should be supported -
> not must.
>
> To fix, switch from irq_of_parse_and_map() to of_irq_get(), which
> does relay whether the IRQ host controller domain is not ready, i.e.
> defer probe, instead of assuming it.
>
> Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ")
> Signed-off-by: John Garry <john.garry@huawei.com>

This indeed looks like a proper way to handle both cases:

Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>

> ---
>
> Change in v2:
> - fix check on irq value
>
> Note: I think that it would better if we could try to get the interrupt
> before clk+pm enabling, so we don't need to disable later when
> deferring, but this is not a fix.
>
> diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
> index af8beef..877fd7f 100644
> --- a/drivers/tty/serial/8250/8250_of.c
> +++ b/drivers/tty/serial/8250/8250_of.c
> @@ -58,7 +58,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
> struct resource resource;
> struct device_node *np = ofdev->dev.of_node;
> u32 clk, spd, prop;
> - int ret;
> + int ret, irq;
>
> memset(port, 0, sizeof *port);
>
> @@ -143,21 +143,27 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
> if (ret >= 0)
> port->line = ret;
>
> - port->irq = irq_of_parse_and_map(np, 0);
> - if (!port->irq) {
> - ret = -EPROBE_DEFER;
> - goto err_unprepare;
> + irq = of_irq_get(np, 0);
> + if (irq < 0) {
> + if (irq == -EPROBE_DEFER) {
> + ret = -EPROBE_DEFER;
> + goto err_unprepare;
> + }
> + /* IRQ support not mandatory */
> + irq = 0;
> }
>
> + port->irq = irq;
> +
> info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
> if (IS_ERR(info->rst)) {
> ret = PTR_ERR(info->rst);
> - goto err_dispose;
> + goto err_unprepare;
> }
>
> ret = reset_control_deassert(info->rst);
> if (ret)
> - goto err_dispose;
> + goto err_unprepare;
>
> port->type = type;
> port->uartclk = clk;
> @@ -184,8 +190,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
> port->handle_irq = fsl8250_handle_irq;
>
> return 0;
> -err_dispose:
> - irq_dispose_mapping(port->irq);
> err_unprepare:
> clk_disable_unprepare(info->clk);
> err_pmruntime:
>

--
Best regards,
Alexander Sverdlin.

\
 
 \ /
  Last update: 2018-08-30 20:23    [W:0.052 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site