lkml.org 
[lkml]   [2018]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next 2/3] net: nixge: Add support for having nixge as subdevice
On Wed, Aug 29, 2018 at 5:49 PM Moritz Fischer <mdf@kernel.org> wrote:
>
> Add support for instantiating nixge as subdevice using
> fixed-link and platform data to configure it.
>
> Signed-off-by: Moritz Fischer <mdf@kernel.org>
> ---
>
> Hi,
>
> not this patch is still in the early stages,
> and as the rest of this series goes on top of [1].
>
> The actual platform data might still change since
> the parent device driver is still under development.
>
> Thanks for your time,
>
> Moritz
>
>
> [1] https://lkml.org/lkml/2018/8/28/1011
>
> ---
> drivers/net/ethernet/ni/nixge.c | 71 ++++++++++++++++++++++++++---
> include/linux/platform_data/nixge.h | 19 ++++++++
> 2 files changed, 83 insertions(+), 7 deletions(-)
> create mode 100644 include/linux/platform_data/nixge.h
>
> diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
> index 670249313ff0..fd8e5b02c459 100644
> --- a/drivers/net/ethernet/ni/nixge.c
> +++ b/drivers/net/ethernet/ni/nixge.c
> @@ -7,6 +7,8 @@
> #include <linux/etherdevice.h>
> #include <linux/module.h>
> #include <linux/netdevice.h>
> +#include <linux/phy_fixed.h>
> +#include <linux/platform_data/nixge.h>
> #include <linux/of_address.h>
> #include <linux/of_mdio.h>
> #include <linux/of_net.h>
> @@ -167,6 +169,7 @@ struct nixge_priv {
> /* Connection to PHY device */
> struct device_node *phy_node;
> phy_interface_t phy_mode;
> + struct phy_device *phydev;
>
> int link;
> unsigned int speed;
> @@ -859,15 +862,25 @@ static void nixge_dma_err_handler(unsigned long data)
> static int nixge_open(struct net_device *ndev)
> {
> struct nixge_priv *priv = netdev_priv(ndev);
> - struct phy_device *phy;
> + struct phy_device *phy = NULL;
> int ret;
>
> nixge_device_reset(ndev);
>
> - phy = of_phy_connect(ndev, priv->phy_node,
> - &nixge_handle_link_change, 0, priv->phy_mode);
> - if (!phy)
> - return -ENODEV;
> + if (priv->dev->of_node) {
> + phy = of_phy_connect(ndev, priv->phy_node,
> + &nixge_handle_link_change, 0,
> + priv->phy_mode);
> + if (!phy)
> + return -ENODEV;
> + } else if (priv->phydev) {
> + ret = phy_connect_direct(ndev, priv->phydev,
> + &nixge_handle_link_change,
> + priv->phy_mode);
> + if (ret)
> + return ret;
> + phy = priv->phydev;
> + }
>
> phy_start(phy);
>
> @@ -1215,10 +1228,41 @@ static int nixge_of_get_phy(struct nixge_priv *priv, struct device_node *np)
> return 0;
> }
>
> +static int nixge_pdata_get_phy(struct nixge_priv *priv,
> + struct nixge_platform_data *pdata)
> +{
> + struct phy_device *phy = NULL;
> +
> + if (!pdata)
> + return -EINVAL;
> +
> + if (pdata && pdata->phy_interface == PHY_INTERFACE_MODE_NA) {
> + struct fixed_phy_status fphy_status = {
> + .link = 1,
> + .duplex = pdata->phy_duplex,
> + .speed = pdata->phy_speed,
> + .pause = 0,
> + .asym_pause = 0,
> + };
> +
> + /* TODO: Pull out GPIO from pdata */
> + phy = fixed_phy_register(PHY_POLL, &fphy_status, -1,
> + NULL);
> + if (IS_ERR_OR_NULL(phy)) {
> + dev_err(priv->dev,
> + "failed to register fixed PHY device\n");
> + return -ENODEV;
> + }
> + }
> + priv->phy_mode = pdata->phy_interface;
> + priv->phydev = phy;
> +
> + return 0;
> +}
> +
> static int nixge_mdio_setup(struct nixge_priv *priv, struct device_node *np)
> {
> struct mii_bus *bus;
> - int err;
>
> bus = devm_mdiobus_alloc(priv->dev);
> if (!bus)
> @@ -1254,6 +1298,7 @@ static void *nixge_get_nvmem_address(struct device *dev)
>
> static int nixge_probe(struct platform_device *pdev)
> {
> + struct nixge_platform_data *pdata = NULL;
> struct nixge_priv *priv;
> struct net_device *ndev;
> struct resource *dmares;
> @@ -1320,10 +1365,16 @@ static int nixge_probe(struct platform_device *pdev)
> err = nixge_of_get_phy(priv, np);
> if (err)
> goto free_netdev;
> + } else {
> + pdata = dev_get_platdata(&pdev->dev);
> + err = nixge_pdata_get_phy(priv, pdata);
> + if (err)
> + goto free_netdev;
> }
>
> /* only if it's not a fixed link, do we care about MDIO at all */
> - if (priv->phy_node && !of_phy_is_fixed_link(np)) {
> + if ((priv->phy_node && !of_phy_is_fixed_link(np)) ||
> + (pdata && pdata->phy_interface != PHY_INTERFACE_MODE_NA)) {

Must've messed up the rebase. Missing a parents. I'll resubmit this
one. Sorry for the noise.
> err = nixge_mdio_setup(priv, np);
> if (err) {
> dev_err(&pdev->dev, "error registering mdio bus");
> @@ -1347,6 +1398,9 @@ static int nixge_probe(struct platform_device *pdev)
> of_phy_deregister_fixed_link(np);
> of_node_put(np);
> }
> +
> + if (priv->phydev && phy_is_pseudo_fixed_link(priv->phydev))
> + fixed_phy_unregister(priv->phydev);
> free_netdev:
> free_netdev(ndev);
>
> @@ -1357,6 +1411,7 @@ static int nixge_remove(struct platform_device *pdev)
> {
> struct net_device *ndev = platform_get_drvdata(pdev);
> struct nixge_priv *priv = netdev_priv(ndev);
> + struct device_node *np = pdev->dev.of_node;
>
> unregister_netdev(ndev);
>
> @@ -1365,6 +1420,8 @@ static int nixge_remove(struct platform_device *pdev)
>
> if (np && of_phy_is_fixed_link(np))
> of_phy_deregister_fixed_link(np);
> + else if (priv->phydev && phy_is_pseudo_fixed_link(priv->phydev))
> + fixed_phy_unregister(priv->phydev);
>
> free_netdev(ndev);
>
> diff --git a/include/linux/platform_data/nixge.h b/include/linux/platform_data/nixge.h
> new file mode 100644
> index 000000000000..aa5dd5760074
> --- /dev/null
> +++ b/include/linux/platform_data/nixge.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2018 National Instruments Corp.
> + *
> + * Author: Moritz Fischer <mdf@kernel.org>
> + */
> +
> +#ifndef __NIXGE_PDATA_H__
> +#define __NIXGE_PDATA_H__
> +
> +#include <linux/phy.h>
> +
> +struct nixge_platform_data {
> + phy_interface_t phy_interface;
> + int phy_speed;
> + int phy_duplex;
> +};
> +
> +#endif /* __NIXGE_PDATA_H__ */
> +
> --
> 2.18.0
>

Thanks,
Moritz

\
 
 \ /
  Last update: 2018-08-30 03:07    [W:0.065 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site