lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] phy: socionext: add USB2 PHY driver for UniPhier SoC
Date
Add a driver for PHY interface built into USB2 controller implemented on
UniPhier SoCs. This driver supports HS-PHY for Pro4 and LD11.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/phy/socionext/Kconfig | 13 ++
drivers/phy/socionext/Makefile | 1 +
drivers/phy/socionext/phy-uniphier-usb2.c | 246 ++++++++++++++++++++++++++++++
3 files changed, 260 insertions(+)
create mode 100644 drivers/phy/socionext/phy-uniphier-usb2.c

diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index 4a172fc..497ca38 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -2,6 +2,19 @@
# PHY drivers for Socionext platforms.
#

+config PHY_UNIPHIER_USB2
+ tristate "UniPhier USB2 PHY driver"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support USB PHY implemented on USB2 controller
+ on UniPhier SoCs. This driver provides interface to interact
+ with USB 2.0 PHY that is part of the UniPhier SoC.
+ In case of Pro4, it is necessary to specify this USB2 PHY instead
+ of USB3 HS-PHY.
+
config PHY_UNIPHIER_USB3
tristate "UniPhier USB3 PHY driver"
depends on ARCH_UNIPHIER || COMPILE_TEST
diff --git a/drivers/phy/socionext/Makefile b/drivers/phy/socionext/Makefile
index e230fa31..91e4825 100644
--- a/drivers/phy/socionext/Makefile
+++ b/drivers/phy/socionext/Makefile
@@ -3,4 +3,5 @@
# Makefile for the phy drivers.
#

+obj-$(CONFIG_PHY_UNIPHIER_USB2) += phy-uniphier-usb2.o
obj-$(CONFIG_PHY_UNIPHIER_USB3) += phy-uniphier-usb3hs.o phy-uniphier-usb3ss.o
diff --git a/drivers/phy/socionext/phy-uniphier-usb2.c b/drivers/phy/socionext/phy-uniphier-usb2.c
new file mode 100644
index 0000000..22eece2
--- /dev/null
+++ b/drivers/phy/socionext/phy-uniphier-usb2.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// phy-uniphier-usb2.c - PHY driver for UniPhier USB2 controller
+// Copyright 2015-2018 Socionext Inc.
+// Author:
+// Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define SG_USBPHY1CTRL 0x500
+#define SG_USBPHY1CTRL2 0x504
+#define SG_USBPHY2CTRL 0x508
+#define SG_USBPHY2CTRL2 0x50c /* LD11 */
+#define SG_USBPHY12PLL 0x50c /* Pro4 */
+#define SG_USBPHY3CTRL 0x510
+#define SG_USBPHY3CTRL2 0x514
+#define SG_USBPHY4CTRL 0x518 /* Pro4 */
+#define SG_USBPHY4CTRL2 0x51c /* Pro4 */
+#define SG_USBPHY34PLL 0x51c /* Pro4 */
+
+struct uniphier_u2phy_param {
+ u32 offset;
+ u32 value;
+};
+
+struct uniphier_u2phy_soc_data {
+ struct uniphier_u2phy_param config0;
+ struct uniphier_u2phy_param config1;
+};
+
+struct uniphier_u2phy_priv {
+ struct regmap *regmap;
+ struct phy *phy;
+ struct regulator *vbus;
+ const struct uniphier_u2phy_soc_data *data;
+ struct uniphier_u2phy_priv *next;
+};
+
+static int uniphier_u2phy_power_on(struct phy *phy)
+{
+ struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ if (priv->vbus)
+ ret = regulator_enable(priv->vbus);
+
+ return ret;
+}
+
+static int uniphier_u2phy_power_off(struct phy *phy)
+{
+ struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
+
+ if (priv->vbus)
+ regulator_disable(priv->vbus);
+
+ return 0;
+}
+
+static int uniphier_u2phy_init(struct phy *phy)
+{
+ struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy);
+
+ if (!priv->data)
+ return 0;
+
+ regmap_write(priv->regmap, priv->data->config0.offset,
+ priv->data->config0.value);
+ regmap_write(priv->regmap, priv->data->config1.offset,
+ priv->data->config1.value);
+
+ return 0;
+}
+
+static struct phy *uniphier_u2phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct uniphier_u2phy_priv *priv = dev_get_drvdata(dev);
+
+ while (priv && args->np != priv->phy->dev.of_node)
+ priv = priv->next;
+
+ if (!priv) {
+ dev_err(dev, "Failed to find appropriate phy\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return priv->phy;
+}
+
+static const struct phy_ops uniphier_u2phy_ops = {
+ .init = uniphier_u2phy_init,
+ .power_on = uniphier_u2phy_power_on,
+ .power_off = uniphier_u2phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int uniphier_u2phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *parent, *child;
+ struct uniphier_u2phy_priv *priv = NULL, *next = NULL;
+ struct phy_provider *phy_provider;
+ struct regmap *regmap;
+ const struct uniphier_u2phy_soc_data *data;
+ int ret, data_idx, ndatas;
+
+ data = of_device_get_match_data(dev);
+ if (WARN_ON(!data))
+ return -EINVAL;
+
+ /* get number of data */
+ for (ndatas = 0; data[ndatas].config0.offset; ndatas++)
+ ;
+
+ parent = of_get_parent(dev->of_node);
+ regmap = syscon_node_to_regmap(parent);
+ of_node_put(parent);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to get regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ for_each_child_of_node(dev->of_node, child) {
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out_put_child;
+ }
+ priv->regmap = regmap;
+
+ priv->vbus = devm_regulator_get_optional(dev, "vbus");
+ if (IS_ERR(priv->vbus)) {
+ if (PTR_ERR(priv->vbus) == -EPROBE_DEFER) {
+ ret = PTR_ERR(priv->vbus);
+ goto out_put_child;
+ }
+ priv->vbus = NULL;
+ }
+
+ priv->phy = devm_phy_create(dev, child, &uniphier_u2phy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "Failed to create phy\n");
+ ret = PTR_ERR(priv->phy);
+ goto out_put_child;
+ }
+
+ ret = of_property_read_u32(child, "reg", &data_idx);
+ if (ret) {
+ dev_err(dev, "Failed to get reg property\n");
+ goto out_put_child;
+ }
+
+ if (data_idx < ndatas)
+ priv->data = &data[data_idx];
+ else
+ dev_warn(dev, "No phy configuration: %s\n",
+ child->full_name);
+
+ phy_set_drvdata(priv->phy, priv);
+ priv->next = next;
+ next = priv;
+ }
+
+ dev_set_drvdata(dev, priv);
+ phy_provider = devm_of_phy_provider_register(dev,
+ uniphier_u2phy_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+
+out_put_child:
+ of_node_put(child);
+
+ return ret;
+}
+
+static const struct uniphier_u2phy_soc_data uniphier_pro4_data[] = {
+ {
+ .config0 = { SG_USBPHY1CTRL, 0x05142400 },
+ .config1 = { SG_USBPHY12PLL, 0x00010010 },
+ },
+ {
+ .config0 = { SG_USBPHY2CTRL, 0x05142400 },
+ .config1 = { SG_USBPHY12PLL, 0x00010010 },
+ },
+ {
+ .config0 = { SG_USBPHY3CTRL, 0x05142400 },
+ .config1 = { SG_USBPHY34PLL, 0x00010010 },
+ },
+ {
+ .config0 = { SG_USBPHY4CTRL, 0x05142400 },
+ .config1 = { SG_USBPHY34PLL, 0x00010010 },
+ },
+ { /* sentinel */ }
+};
+
+static const struct uniphier_u2phy_soc_data uniphier_ld11_data[] = {
+ {
+ .config0 = { SG_USBPHY1CTRL, 0x82280000 },
+ .config1 = { SG_USBPHY1CTRL2, 0x00000106 },
+ },
+ {
+ .config0 = { SG_USBPHY2CTRL, 0x82280000 },
+ .config1 = { SG_USBPHY2CTRL2, 0x00000106 },
+ },
+ {
+ .config0 = { SG_USBPHY3CTRL, 0x82280000 },
+ .config1 = { SG_USBPHY3CTRL2, 0x00000106 },
+ },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id uniphier_u2phy_match[] = {
+ {
+ .compatible = "socionext,uniphier-pro4-usb2-phy",
+ .data = &uniphier_pro4_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld11-usb2-phy",
+ .data = &uniphier_ld11_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_u2phy_match);
+
+static struct platform_driver uniphier_u2phy_driver = {
+ .probe = uniphier_u2phy_probe,
+ .driver = {
+ .name = "uniphier-usb2-phy",
+ .of_match_table = uniphier_u2phy_match,
+ },
+};
+module_platform_driver(uniphier_u2phy_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier PHY driver for USB2 controller");
+MODULE_LICENSE("GPL v2");
--
2.7.4
\
 
 \ /
  Last update: 2018-08-03 11:56    [W:0.080 / U:3.084 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site