lkml.org 
[lkml]   [2018]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 18/21] staging:rtl8192u: Rename MCS - Style
Date
Rename the member 'MCS' to 'cap_mcs', since the uppercase name
conflicts with the coding standard. The 'cap' has been prepended
to make the variable easier to find in the code.

This is a coding style change which should have no impact on runtime
code execution.

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../staging/rtl8192u/ieee80211/ieee80211_wx.c | 2 +-
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 2 +-
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 20 +++++++++----------
3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index a6fe975902bb..a96cc5c01b10 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -159,7 +159,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
((ht_cap->short_gi40_mhz)?1:0):
((ht_cap->short_gi20_mhz)?1:0);

- max_mcs = HTGetHighestMCSRate(ieee, ht_cap->MCS, MCS_FILTER_ALL);
+ max_mcs = HTGetHighestMCSRate(ieee, ht_cap->cap_mcs, MCS_FILTER_ALL);
rate = MCS_DATA_RATE[is40M][isShortGI][max_mcs&0x7f];
if (rate > max_rate)
max_rate = rate;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index 2b73279b45d8..edd0c00307bf 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -60,7 +60,7 @@ struct ht_capability_ele {
u8 not_used_rsvd2:3;

//Supported MCS set
- u8 MCS[16];
+ u8 cap_mcs[16];

//Extended HT Capability Info
u16 ExtHTCapInfo;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 19c4903b572f..625d117e5a8f 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -149,8 +149,8 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->dss_cck) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMPDU Factor = %d\n", pCapELE->max_rx_ampdu_factor);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMPDU Density = %d\n", pCapELE->mpdu_density);
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
- pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->cap_mcs[0],\
+ pCapELE->cap_mcs[1], pCapELE->cap_mcs[2], pCapELE->cap_mcs[3], pCapELE->cap_mcs[4]);
}

/*
@@ -578,15 +578,15 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
}

//Supported MCS set
- memcpy(pCapELE->MCS, ieee->Regdot11HTOperationalRateSet, 16);
+ memcpy(pCapELE->cap_mcs, ieee->Regdot11HTOperationalRateSet, 16);
if (pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS15)
- pCapELE->MCS[1] &= 0x7f;
+ pCapELE->cap_mcs[1] &= 0x7f;

if (pHT->IOTAction & HT_IOT_ACT_DISABLE_MCS14)
- pCapELE->MCS[1] &= 0xbf;
+ pCapELE->cap_mcs[1] &= 0xbf;

if (pHT->IOTAction & HT_IOT_ACT_DISABLE_ALL_2SS)
- pCapELE->MCS[1] &= 0x00;
+ pCapELE->cap_mcs[1] &= 0x00;

/*
* 2008.06.12
@@ -596,7 +596,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
int i;

for (i = 1; i < 16; i++)
- pCapELE->MCS[i] = 0;
+ pCapELE->cap_mcs[i] = 0;
}

//Extended HT Capability Info
@@ -1037,10 +1037,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
* Handle Ralink AP bad MCS rate set condition. Joseph.
* This fix the bug of Ralink AP. This may be removed in the future.
*/
- if (pPeerHTCap->MCS[0] == 0)
- pPeerHTCap->MCS[0] = 0xff;
+ if (pPeerHTCap->cap_mcs[0] == 0)
+ pPeerHTCap->cap_mcs[0] = 0xff;

- HTFilterMCSRate(ieee, pPeerHTCap->MCS, ieee->dot11HTOperationalRateSet);
+ HTFilterMCSRate(ieee, pPeerHTCap->cap_mcs, ieee->dot11HTOperationalRateSet);

/*
* Config MIMO Power Save setting
--
2.18.0
\
 
 \ /
  Last update: 2018-08-29 22:37    [W:0.170 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site