lkml.org 
[lkml]   [2018]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: nixge: Add support for 64-bit platforms
Date
Add support for 64-bit platforms to driver.

The hardware only supports 32-bit register accesses
so the accesses need to be split up into two writes
when setting the current and tail descriptor values.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
---
Hi Dave,

I'll submit the other changes for fixed_phy / non MDIO support
as a separate series since I'm ironing out some issues on ARM
with devicetree overlays.

Thanks,
Moritz
---
drivers/net/ethernet/ni/Kconfig | 3 +-
drivers/net/ethernet/ni/nixge.c | 168 ++++++++++++++++++++++----------
2 files changed, 116 insertions(+), 55 deletions(-)

diff --git a/drivers/net/ethernet/ni/Kconfig b/drivers/net/ethernet/ni/Kconfig
index aa41e5f6e437..04e315704f71 100644
--- a/drivers/net/ethernet/ni/Kconfig
+++ b/drivers/net/ethernet/ni/Kconfig
@@ -18,8 +18,9 @@ if NET_VENDOR_NI

config NI_XGE_MANAGEMENT_ENET
tristate "National Instruments XGE management enet support"
- depends on ARCH_ZYNQ
+ depends on HAS_IOMEM && HAS_DMA
select PHYLIB
+ select OF_MDIO
help
Simple LAN device for debug or management purposes. Can
support either 10G or 1G PHYs via SFP+ ports.
diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index 76efed058f33..74cf52e3fb09 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -106,10 +106,10 @@
(NIXGE_JUMBO_MTU + NIXGE_HDR_SIZE + NIXGE_TRL_SIZE)

struct nixge_hw_dma_bd {
- u32 next;
- u32 reserved1;
- u32 phys;
- u32 reserved2;
+ u32 next_lo;
+ u32 next_hi;
+ u32 phys_lo;
+ u32 phys_hi;
u32 reserved3;
u32 reserved4;
u32 cntrl;
@@ -119,11 +119,39 @@ struct nixge_hw_dma_bd {
u32 app2;
u32 app3;
u32 app4;
- u32 sw_id_offset;
- u32 reserved5;
+ u32 sw_id_offset_lo;
+ u32 sw_id_offset_hi;
u32 reserved6;
};

+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+#define nixge_hw_dma_bd_set_addr(bd, field, addr) \
+ do { \
+ (bd)->field##_lo = lower_32_bits(((u64)addr)); \
+ (bd)->field##_hi = upper_32_bits(((u64)addr)); \
+ } while (0)
+#else
+#define nixge_hw_dma_bd_set_addr(bd, field, addr) \
+ ((bd)->field##_lo = lower_32_bits((addr)))
+#endif
+
+#define nixge_hw_dma_bd_set_phys(bd, addr) \
+ nixge_hw_dma_bd_set_addr((bd), phys, (addr))
+
+#define nixge_hw_dma_bd_set_next(bd, addr) \
+ nixge_hw_dma_bd_set_addr((bd), next, (addr))
+
+#define nixge_hw_dma_bd_set_offset(bd, addr) \
+ nixge_hw_dma_bd_set_addr((bd), sw_id_offset, (addr))
+
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+#define nixge_hw_dma_bd_get_addr(bd, field) \
+ (dma_addr_t)((((u64)(bd)->field##_hi) << 32) | ((bd)->field##_lo))
+#else
+#define nixge_hw_dma_bd_get_addr(bd, field) \
+ (dma_addr_t)((bd)->field##_lo)
+#endif
+
struct nixge_tx_skb {
struct sk_buff *skb;
dma_addr_t mapping;
@@ -176,6 +204,15 @@ static void nixge_dma_write_reg(struct nixge_priv *priv, off_t offset, u32 val)
writel(val, priv->dma_regs + offset);
}

+static void nixge_dma_write_desc_reg(struct nixge_priv *priv, off_t offset,
+ dma_addr_t addr)
+{
+ writel(lower_32_bits(addr), priv->dma_regs + offset);
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+ writel(upper_32_bits(addr), priv->dma_regs + offset + 4);
+#endif
+}
+
static u32 nixge_dma_read_reg(const struct nixge_priv *priv, off_t offset)
{
return readl(priv->dma_regs + offset);
@@ -202,13 +239,22 @@ static u32 nixge_ctrl_read_reg(struct nixge_priv *priv, off_t offset)
static void nixge_hw_dma_bd_release(struct net_device *ndev)
{
struct nixge_priv *priv = netdev_priv(ndev);
+ dma_addr_t phys_addr;
+ struct sk_buff *skb;
int i;

for (i = 0; i < RX_BD_NUM; i++) {
- dma_unmap_single(ndev->dev.parent, priv->rx_bd_v[i].phys,
- NIXGE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE);
- dev_kfree_skb((struct sk_buff *)
- (priv->rx_bd_v[i].sw_id_offset));
+ phys_addr = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i],
+ phys);
+
+ dma_unmap_single(ndev->dev.parent, phys_addr,
+ NIXGE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+
+ skb = (struct sk_buff *)
+ nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[i],
+ sw_id_offset);
+ dev_kfree_skb(skb);
}

if (priv->rx_bd_v)
@@ -231,6 +277,7 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev)
{
struct nixge_priv *priv = netdev_priv(ndev);
struct sk_buff *skb;
+ dma_addr_t phys;
u32 cr;
int i;

@@ -259,27 +306,30 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev)
goto out;

for (i = 0; i < TX_BD_NUM; i++) {
- priv->tx_bd_v[i].next = priv->tx_bd_p +
- sizeof(*priv->tx_bd_v) *
- ((i + 1) % TX_BD_NUM);
+ nixge_hw_dma_bd_set_next(&priv->tx_bd_v[i],
+ priv->tx_bd_p +
+ sizeof(*priv->tx_bd_v) *
+ ((i + 1) % TX_BD_NUM));
}

for (i = 0; i < RX_BD_NUM; i++) {
- priv->rx_bd_v[i].next = priv->rx_bd_p +
- sizeof(*priv->rx_bd_v) *
- ((i + 1) % RX_BD_NUM);
+ nixge_hw_dma_bd_set_next(&priv->rx_bd_v[i],
+ priv->rx_bd_p
+ + sizeof(*priv->rx_bd_v) *
+ ((i + 1) % RX_BD_NUM));

skb = netdev_alloc_skb_ip_align(ndev,
NIXGE_MAX_JUMBO_FRAME_SIZE);
if (!skb)
goto out;

- priv->rx_bd_v[i].sw_id_offset = (u32)skb;
- priv->rx_bd_v[i].phys =
- dma_map_single(ndev->dev.parent,
- skb->data,
- NIXGE_MAX_JUMBO_FRAME_SIZE,
- DMA_FROM_DEVICE);
+ nixge_hw_dma_bd_set_offset(&priv->rx_bd_v[i], skb);
+ phys = dma_map_single(ndev->dev.parent, skb->data,
+ NIXGE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+
+ nixge_hw_dma_bd_set_phys(&priv->rx_bd_v[i], phys);
+
priv->rx_bd_v[i].cntrl = NIXGE_MAX_JUMBO_FRAME_SIZE;
}

@@ -312,18 +362,18 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev)
/* Populate the tail pointer and bring the Rx Axi DMA engine out of
* halted state. This will make the Rx side ready for reception.
*/
- nixge_dma_write_reg(priv, XAXIDMA_RX_CDESC_OFFSET, priv->rx_bd_p);
+ nixge_dma_write_desc_reg(priv, XAXIDMA_RX_CDESC_OFFSET, priv->rx_bd_p);
cr = nixge_dma_read_reg(priv, XAXIDMA_RX_CR_OFFSET);
nixge_dma_write_reg(priv, XAXIDMA_RX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
- nixge_dma_write_reg(priv, XAXIDMA_RX_TDESC_OFFSET, priv->rx_bd_p +
+ nixge_dma_write_desc_reg(priv, XAXIDMA_RX_TDESC_OFFSET, priv->rx_bd_p +
(sizeof(*priv->rx_bd_v) * (RX_BD_NUM - 1)));

/* Write to the RS (Run-stop) bit in the Tx channel control register.
* Tx channel is now ready to run. But only after we write to the
* tail pointer register that the Tx channel will start transmitting.
*/
- nixge_dma_write_reg(priv, XAXIDMA_TX_CDESC_OFFSET, priv->tx_bd_p);
+ nixge_dma_write_desc_reg(priv, XAXIDMA_TX_CDESC_OFFSET, priv->tx_bd_p);
cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
nixge_dma_write_reg(priv, XAXIDMA_TX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
@@ -451,7 +501,7 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
struct nixge_priv *priv = netdev_priv(ndev);
struct nixge_hw_dma_bd *cur_p;
struct nixge_tx_skb *tx_skb;
- dma_addr_t tail_p;
+ dma_addr_t tail_p, cur_phys;
skb_frag_t *frag;
u32 num_frag;
u32 ii;
@@ -466,15 +516,16 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
return NETDEV_TX_OK;
}

- cur_p->phys = dma_map_single(ndev->dev.parent, skb->data,
- skb_headlen(skb), DMA_TO_DEVICE);
- if (dma_mapping_error(ndev->dev.parent, cur_p->phys))
+ cur_phys = dma_map_single(ndev->dev.parent, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (dma_mapping_error(ndev->dev.parent, cur_phys))
goto drop;
+ nixge_hw_dma_bd_set_phys(cur_p, cur_phys);

cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK;

tx_skb->skb = NULL;
- tx_skb->mapping = cur_p->phys;
+ tx_skb->mapping = cur_phys;
tx_skb->size = skb_headlen(skb);
tx_skb->mapped_as_page = false;

@@ -485,16 +536,17 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)
tx_skb = &priv->tx_skb[priv->tx_bd_tail];
frag = &skb_shinfo(skb)->frags[ii];

- cur_p->phys = skb_frag_dma_map(ndev->dev.parent, frag, 0,
- skb_frag_size(frag),
- DMA_TO_DEVICE);
- if (dma_mapping_error(ndev->dev.parent, cur_p->phys))
+ cur_phys = skb_frag_dma_map(ndev->dev.parent, frag, 0,
+ skb_frag_size(frag),
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(ndev->dev.parent, cur_phys))
goto frag_err;
+ nixge_hw_dma_bd_set_phys(cur_p, cur_phys);

cur_p->cntrl = skb_frag_size(frag);

tx_skb->skb = NULL;
- tx_skb->mapping = cur_p->phys;
+ tx_skb->mapping = cur_phys;
tx_skb->size = skb_frag_size(frag);
tx_skb->mapped_as_page = true;
}
@@ -506,7 +558,7 @@ static int nixge_start_xmit(struct sk_buff *skb, struct net_device *ndev)

tail_p = priv->tx_bd_p + sizeof(*priv->tx_bd_v) * priv->tx_bd_tail;
/* Start the transfer */
- nixge_dma_write_reg(priv, XAXIDMA_TX_TDESC_OFFSET, tail_p);
+ nixge_dma_write_desc_reg(priv, XAXIDMA_TX_TDESC_OFFSET, tail_p);
++priv->tx_bd_tail;
priv->tx_bd_tail %= TX_BD_NUM;

@@ -537,7 +589,7 @@ static int nixge_recv(struct net_device *ndev, int budget)
struct nixge_priv *priv = netdev_priv(ndev);
struct sk_buff *skb, *new_skb;
struct nixge_hw_dma_bd *cur_p;
- dma_addr_t tail_p = 0;
+ dma_addr_t tail_p = 0, cur_phys = 0;
u32 packets = 0;
u32 length = 0;
u32 size = 0;
@@ -549,13 +601,15 @@ static int nixge_recv(struct net_device *ndev, int budget)
tail_p = priv->rx_bd_p + sizeof(*priv->rx_bd_v) *
priv->rx_bd_ci;

- skb = (struct sk_buff *)(cur_p->sw_id_offset);
+ skb = (struct sk_buff *)nixge_hw_dma_bd_get_addr(cur_p,
+ sw_id_offset);

length = cur_p->status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
if (length > NIXGE_MAX_JUMBO_FRAME_SIZE)
length = NIXGE_MAX_JUMBO_FRAME_SIZE;

- dma_unmap_single(ndev->dev.parent, cur_p->phys,
+ dma_unmap_single(ndev->dev.parent,
+ nixge_hw_dma_bd_get_addr(cur_p, phys),
NIXGE_MAX_JUMBO_FRAME_SIZE,
DMA_FROM_DEVICE);

@@ -579,16 +633,17 @@ static int nixge_recv(struct net_device *ndev, int budget)
if (!new_skb)
return packets;

- cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
- NIXGE_MAX_JUMBO_FRAME_SIZE,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(ndev->dev.parent, cur_p->phys)) {
+ cur_phys = dma_map_single(ndev->dev.parent, new_skb->data,
+ NIXGE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(ndev->dev.parent, cur_phys)) {
/* FIXME: bail out and clean up */
netdev_err(ndev, "Failed to map ...\n");
}
+ nixge_hw_dma_bd_set_phys(cur_p, cur_phys);
cur_p->cntrl = NIXGE_MAX_JUMBO_FRAME_SIZE;
cur_p->status = 0;
- cur_p->sw_id_offset = (u32)new_skb;
+ nixge_hw_dma_bd_set_offset(cur_p, new_skb);

++priv->rx_bd_ci;
priv->rx_bd_ci %= RX_BD_NUM;
@@ -599,7 +654,7 @@ static int nixge_recv(struct net_device *ndev, int budget)
ndev->stats.rx_bytes += size;

if (tail_p)
- nixge_dma_write_reg(priv, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+ nixge_dma_write_desc_reg(priv, XAXIDMA_RX_TDESC_OFFSET, tail_p);

return packets;
}
@@ -637,6 +692,7 @@ static irqreturn_t nixge_tx_irq(int irq, void *_ndev)
struct nixge_priv *priv = netdev_priv(_ndev);
struct net_device *ndev = _ndev;
unsigned int status;
+ dma_addr_t phys;
u32 cr;

status = nixge_dma_read_reg(priv, XAXIDMA_TX_SR_OFFSET);
@@ -650,9 +706,11 @@ static irqreturn_t nixge_tx_irq(int irq, void *_ndev)
return IRQ_NONE;
}
if (status & XAXIDMA_IRQ_ERROR_MASK) {
+ phys = nixge_hw_dma_bd_get_addr(&priv->tx_bd_v[priv->tx_bd_ci],
+ phys);
+
netdev_err(ndev, "DMA Tx error 0x%x\n", status);
- netdev_err(ndev, "Current BD is at: 0x%x\n",
- (priv->tx_bd_v[priv->tx_bd_ci]).phys);
+ netdev_err(ndev, "Current BD is at: 0x%llx\n", (u64)phys);

cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
/* Disable coalesce, delay timer and error interrupts */
@@ -678,6 +736,7 @@ static irqreturn_t nixge_rx_irq(int irq, void *_ndev)
struct nixge_priv *priv = netdev_priv(_ndev);
struct net_device *ndev = _ndev;
unsigned int status;
+ dma_addr_t phys;
u32 cr;

status = nixge_dma_read_reg(priv, XAXIDMA_RX_SR_OFFSET);
@@ -697,9 +756,10 @@ static irqreturn_t nixge_rx_irq(int irq, void *_ndev)
return IRQ_NONE;
}
if (status & XAXIDMA_IRQ_ERROR_MASK) {
+ phys = nixge_hw_dma_bd_get_addr(&priv->rx_bd_v[priv->rx_bd_ci],
+ phys);
netdev_err(ndev, "DMA Rx error 0x%x\n", status);
- netdev_err(ndev, "Current BD is at: 0x%x\n",
- (priv->rx_bd_v[priv->rx_bd_ci]).phys);
+ netdev_err(ndev, "Current BD is at: 0x%llx\n", (u64)phys);

cr = nixge_dma_read_reg(priv, XAXIDMA_TX_CR_OFFSET);
/* Disable coalesce, delay timer and error interrupts */
@@ -735,10 +795,10 @@ static void nixge_dma_err_handler(unsigned long data)
tx_skb = &lp->tx_skb[i];
nixge_tx_skb_unmap(lp, tx_skb);

- cur_p->phys = 0;
+ nixge_hw_dma_bd_set_phys(cur_p, 0);
cur_p->cntrl = 0;
cur_p->status = 0;
- cur_p->sw_id_offset = 0;
+ nixge_hw_dma_bd_set_offset(cur_p, 0);
}

for (i = 0; i < RX_BD_NUM; i++) {
@@ -779,18 +839,18 @@ static void nixge_dma_err_handler(unsigned long data)
/* Populate the tail pointer and bring the Rx Axi DMA engine out of
* halted state. This will make the Rx side ready for reception.
*/
- nixge_dma_write_reg(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
+ nixge_dma_write_desc_reg(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
cr = nixge_dma_read_reg(lp, XAXIDMA_RX_CR_OFFSET);
nixge_dma_write_reg(lp, XAXIDMA_RX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
- nixge_dma_write_reg(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
+ nixge_dma_write_desc_reg(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
(sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));

/* Write to the RS (Run-stop) bit in the Tx channel control register.
* Tx channel is now ready to run. But only after we write to the
* tail pointer register that the Tx channel will start transmitting
*/
- nixge_dma_write_reg(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
+ nixge_dma_write_desc_reg(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
cr = nixge_dma_read_reg(lp, XAXIDMA_TX_CR_OFFSET);
nixge_dma_write_reg(lp, XAXIDMA_TX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
--
2.18.0
\
 
 \ /
  Last update: 2018-08-29 00:25    [W:0.066 / U:2.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site