lkml.org 
[lkml]   [2018]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: adc: qcom-spmi-adc5: Add ADC5_AMUX_THM[24]_100K_PU to rev2 channel list
On Sun, Aug 19, 2018 at 05:54:52PM +0100, Jonathan Cameron wrote:
> On Fri, 10 Aug 2018 12:47:02 -0700
> Matthias Kaehlcke <mka@chromium.org> wrote:
>
> > Add ADC5_AMUX_THM2_100K_PU and ADC5_AMUX_THM4_100K_PU to the list of
> > rev2 ADC channels.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> This is fine and applied to the togreg branch of iio.git.
> Pushed out as testing to let the autobuilders play with it.

Thanks!

> However, I took a quick look and can't immediately see what prevents us
> specifying channels in DT that don't have these definitions in the driver.

Indeed, the DT could just specify an arbitrary value.

> Should we have a check for that as at least superficially it seems like
> a bad idea!

It seems there isn't a single contiguous range, but a very superficial
check could at least verify that the value isn't larger than CHAN_MAX
or check a few sub-ranges.

> > ---
> > drivers/iio/adc/qcom-spmi-adc5.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> > index a4299417f3de..1f9298a5c83d 100644
> > --- a/drivers/iio/adc/qcom-spmi-adc5.c
> > +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> > @@ -491,8 +491,12 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
> > SCALE_HW_CALIB_PMIC_THERM)
> > [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
> > SCALE_HW_CALIB_THERM_100K_PULLUP)
> > + [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
> > + SCALE_HW_CALIB_THERM_100K_PULLUP)
> > [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
> > SCALE_HW_CALIB_THERM_100K_PULLUP)
> > + [ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 1,
> > + SCALE_HW_CALIB_THERM_100K_PULLUP)
> > [ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 1,
> > SCALE_HW_CALIB_THERM_100K_PULLUP)
> > [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm_100k_pu", 1,
>

\
 
 \ /
  Last update: 2018-08-25 00:15    [W:0.057 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site