lkml.org 
[lkml]   [2018]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 3/3] dt-bindings: can: rcar_can: Add r8a774a1 support
Date
Hello Simon,

Thank you for your feedback!

> Subject: Re: [PATCH 3/3] dt-bindings: can: rcar_can: Add r8a774a1 support
>
> On Thu, Aug 23, 2018 at 02:07:33PM +0100, Fabrizio Castro wrote:
> > Document RZ/G2M (r8a774a1) SoC specific bindings and RZ/G2
> > generic bindings.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
>
> Are we sure these clocks are for all RZ/G2 SoCs?

Yeah, that's the expectation.

Thanks,
Fab

> If so:
>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
>
> > ---
> >
> > This patch applies on next-20180823
> >
> > Documentation/devicetree/bindings/net/can/rcar_can.txt | 11 ++++++++---
> > 1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > index 94a7f33..ae8fccc 100644
> > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
> > Required properties:
> > - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
> > "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> > + "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
> > "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> > "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> > "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> > @@ -17,6 +18,7 @@ Required properties:
> > "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
> > compatible device.
> > "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> > + "renesas,rzg-gen2-can" for a generic RZ/G2 compatible device.
> > When compatible with the generic version, nodes must list the
> > SoC-specific version corresponding to the platform first
> > followed by the generic version.
> > @@ -24,7 +26,9 @@ Required properties:
> > - reg: physical base address and size of the R-Car CAN register map.
> > - interrupts: interrupt specifier for the sole interrupt.
> > - clocks: phandles and clock specifiers for 3 CAN clock inputs.
> > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> > + 3 clock input name strings for every other SoC: "clkp1", "clkp2",
> > + "can_clk".
> > - pinctrl-0: pin control group to be used for this controller.
> > - pinctrl-names: must be "default".
> >
> > @@ -41,8 +45,9 @@ using the below properties:
> > Optional properties:
> > - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> > <0x0> (default) : Peripheral clock (clkp1)
> > - <0x1> : Peripheral clock (clkp2)
> > - <0x3> : Externally input clock
> > + <0x1> : Peripheral clock (clkp2) (not supported by
> > + RZ/G2 devices)
> > + <0x3> : External input clock
> >
> > Example
> > -------
> > --
> > 2.7.4
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

\
 
 \ /
  Last update: 2018-08-24 11:23    [W:1.705 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site