lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] fix vibrations on Droid 4
Hi,

On Wed, Aug 01, 2018 at 10:28:21PM +0200, Pavel Machek wrote:
> Vibration GPIOs don't have anything to do with wakeup. Move it to
> normal section; this fixes vibrations on Droid 4.
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> index c27fc87..7b82179 100644

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> @@ -646,15 +646,6 @@
> OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
> >;
> };
> -};
> -
> -&omap4_pmx_wkup {
> - usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
> - /* gpio_wk0 */
> - pinctrl-single,pins = <
> - OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
> - >;
> - };
>
> vibrator_direction_pin: pinmux_vibrator_direction_pin {
> pinctrl-single,pins = <
> @@ -669,6 +660,15 @@
> };
> };
>
> +&omap4_pmx_wkup {
> + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
> + /* gpio_wk0 */
> + pinctrl-single,pins = <
> + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
> + >;
> + };
> +};
> +
> /*
> * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
> * uart1 wakeirq.
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-08-02 12:56    [W:1.159 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site