lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 05/14] gpu: ipu-v3: Allow negative offsets for interlaced scanning
From
Date
On Wed, 2018-08-01 at 12:12 -0700, Steve Longerbeam wrote:
> From: Philipp Zabel <p.zabel@pengutronix.de>
>
> The IPU also supports interlaced buffers that start with the bottom field.
> To achieve this, the the base address EBA has to be increased by a stride
> length and the interlace offset ILO has to be set to the negative stride.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
> ---
> drivers/gpu/ipu-v3/ipu-cpmem.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c
> index e68e473..8cd9e37 100644
> --- a/drivers/gpu/ipu-v3/ipu-cpmem.c
> +++ b/drivers/gpu/ipu-v3/ipu-cpmem.c
> @@ -269,9 +269,20 @@ EXPORT_SYMBOL_GPL(ipu_cpmem_set_uv_offset);
>
> void ipu_cpmem_interlaced_scan(struct ipuv3_channel *ch, int stride)
> {
> + u32 ilo, sly;
> +
> + if (stride < 0) {
> + stride = -stride;
> + ilo = 0x100000 - (stride / 8);
> + } else {
> + ilo = stride / 8;
> + }
> +
> + sly = (stride * 2) - 1;
> +
> ipu_ch_param_write_field(ch, IPU_FIELD_SO, 1);
> - ipu_ch_param_write_field(ch, IPU_FIELD_ILO, stride / 8);
> - ipu_ch_param_write_field(ch, IPU_FIELD_SLY, (stride * 2) - 1);
> + ipu_ch_param_write_field(ch, IPU_FIELD_ILO, ilo);
> + ipu_ch_param_write_field(ch, IPU_FIELD_SLY, sly);
> };
> EXPORT_SYMBOL_GPL(ipu_cpmem_interlaced_scan);

This patch is merged in drm-next: 4e3c5d7e05be ("gpu: ipu-v3: Allow
negative offsets for interlaced scanning")

regards
Philipp

\
 
 \ /
  Last update: 2018-08-02 11:47    [W:0.060 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site