lkml.org 
[lkml]   [2018]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: Should we split the network filesystem setup into two phases?
    David Howells <dhowells@redhat.com> writes:

    > Having just re-ported NFS on top of the new mount API stuff, I find that I
    > don't really like the idea of superblocks being separated by communication
    > parameters - especially when it might seem reasonable to be able to adjust
    > those parameters.
    >
    > Does it make sense to abstract out the remote peer and allow (a) that to be
    > configured separately from any superblocks using it and (b) that to be used to
    > create superblocks?
    >
    > Note that what a 'remote peer' is would be different for different
    > filesystems:
    >
    > (*) For NFS, it would probably be a named server, with address(es) attached
    > to the name. In lieu of actually having a name, the initial IP address
    > could be used.
    >
    > (*) For CIFS, it would probably be a named server. I'm not sure if CIFS
    > allows an abstraction for a share that can move about inside a domain.
    >
    > (*) For AFS, it would be a cell, I think, where the actual fileserver(s) used
    > are a matter of direction from the Volume Location server.
    >
    > (*) For 9P and Ceph, I don't really know.
    >
    > What could be configured? Well, addresses, ports, timeouts. Maybe protocol
    > level negotiation - though not being able to explicitly specify, say, the
    > particular version and minorversion on an NFS share would be problematic for
    > backward compatibility.
    >
    > One advantage it could give us is that it might make it easier if someone asks
    > for server X to query userspace in some way for the default parameters for X
    > are.
    >
    > What might this look like in terms of userspace? Well, we could overload the
    > new mount API:
    >
    > peer1 = fsopen("nfs", FSOPEN_CREATE_PEER);
    > fsconfig(peer1, FSCONFIG_SET_NS, "net", NULL, netns_fd);
    > fsconfig(peer1, FSCONFIG_SET_STRING, "peer_name", "server.home");
    > fsconfig(peer1, FSCONFIG_SET_STRING, "vers", "4.2");
    > fsconfig(peer1, FSCONFIG_SET_STRING, "address", "tcp:192.168.1.1");
    > fsconfig(peer1, FSCONFIG_SET_STRING, "address", "tcp:192.168.1.2");
    > fsconfig(peer1, FSCONFIG_SET_STRING, "timeo", "122");
    > fsconfig(peer1, FSCONFIG_CMD_SET_UP_PEER, NULL, NULL, 0);
    >
    > peer2 = fsopen("nfs", FSOPEN_CREATE_PEER);
    > fsconfig(peer2, FSCONFIG_SET_NS, "net", NULL, netns_fd);
    > fsconfig(peer2, FSCONFIG_SET_STRING, "peer_name", "server2.home");
    > fsconfig(peer2, FSCONFIG_SET_STRING, "vers", "3");
    > fsconfig(peer2, FSCONFIG_SET_STRING, "address", "tcp:192.168.1.3");
    > fsconfig(peer2, FSCONFIG_SET_STRING, "address", "udp:192.168.1.4+6001");
    > fsconfig(peer2, FSCONFIG_CMD_SET_UP_PEER, NULL, NULL, 0);
    >
    > fs = fsopen("nfs", 0);
    > fsconfig(fs, FSCONFIG_SET_PEER, "peer.1", NULL, peer1);
    > fsconfig(fs, FSCONFIG_SET_PEER, "peer.2", NULL, peer2);
    > fsconfig(fs, FSCONFIG_SET_STRING, "source", "/home/dhowells", 0);
    > m = fsmount(fs, 0, 0);
    >
    > [Note that Eric's oft-repeated point about the 'creation' operation altering
    > established parameters still stands here.]
    >
    > You could also then reopen it for configuration, maybe by:
    >
    > peer = fspick(AT_FDCWD, "/mnt", FSPICK_PEER);
    >
    > or:
    >
    > peer = fspick(AT_FDCWD, "nfs:server.home", FSPICK_PEER_BY_NAME);
    >
    > though it might be better to give it its own syscall:
    >
    > peer = fspeer("nfs", "server.home", O_CLOEXEC);
    > fsconfig(peer, FSCONFIG_SET_NS, "net", NULL, netns_fd);
    > ...
    > fsconfig(peer, FSCONFIG_CMD_SET_UP_PEER, NULL, NULL, 0);
    >
    > In terms of alternative interfaces, I'm not sure how easy it would be to make
    > it like cgroups where you go and create a dir in a special filesystem, say,
    > "/sys/peers/nfs", because the peers records and names would have to be network
    > namespaced. Also, it might make it more difficult to use to create a root fs.
    >
    > On the other hand, being able to adjust the peer configuration by:
    >
    > echo 71 >/sys/peers/nfs/server.home/timeo
    >
    > does have a certain appeal.
    >
    > Also, netlink might be the right option, but I'm not sure how you'd pin the
    > resultant object whilst you make use of it.
    >
    > A further thought is that is it worth making this idea more general and
    > encompassing non-network devices also? This would run into issues of some
    > logical sources being visible across namespaces and but not others.

    Even network filesystems are going to have challenges of filesystems
    being visible in some network namespaces and not others. As some
    filesystems will be visible on the internet and some filesystems will
    only be visible on the appropriate local network. Network namespaces
    are sometimes used to deal with the case of local networks with
    overlapping ip addresses.

    I think you are proposing a model for network filesystems that is
    essentially the same situation where we are with most block devices
    filesystems today. Where some parameters identitify the local
    filesystem instance and some parameters identify how the kernel
    interacts with that filesystem instance.


    For system efficiency there is a strong argument for having the fewest
    number of filesystem instances we can. Otherwise we will be caching the
    same data twice and wasting space in RAM etc.


    So I like the idea.


    At least for devpts we always create a new filesystem instance every
    time mount(2) is called. NFS seems to have the option to create a new
    filesystem instance every time mount(2) is called as well, (even if the
    filesystem parameters are the same). And depending on the case I can
    see the attraction for other filesystems as well.

    So I don't think we can completely abandon the option for filesystems
    to always create a new filesystem instance when mount(8) is called.



    I most definitely support thinking this through and figuring out how it
    best make sense for the new filesystem API to create new filesystem
    instances or fail to create new filesystems instances.


    Eric

    \
     
     \ /
      Last update: 2018-08-16 07:07    [W:4.320 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site