lkml.org 
[lkml]   [2018]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 2/4] dt-bindings: phy-rockchip-inno-usb2: add documentation for extcon and utmi-avalid properties.
    On Wed, Aug 15, 2018 at 11:59:32AM +0200, Enric Balletbo i Serra wrote:
    > Commit 98898f3bc83c8 ("phy: rockchip-inno-usb2: support otg-port for
    > rk3399") introduces two new properties. The extcon property is used to
    > detect the cable-state, and the rockchip,utmi-avalid is used to indicate
    > which register should be used to detect the vbus state.
    >
    > Document these properties in the documentation binding.
    >
    > Fixes: 98898f3bc83c8 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
    > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
    > ---
    >
    > .../devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 3 +++
    > 1 file changed, 3 insertions(+)
    >
    > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
    > index 074a7b3b0425..2d4808d3920b 100644
    > --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
    > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
    > @@ -23,6 +23,7 @@ Optional properties:
    > register files". When set driver will request its
    > phandle as one companion-grf for some special SoCs
    > (e.g RV1108).
    > + - extcon : phandle to the extcon device for the otg phy.

    extcon is not a good binding. The usb connector binding should be used
    instead for new users.

    Rob

    \
     
     \ /
      Last update: 2018-08-16 00:22    [W:4.093 / U:0.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site