lkml.org 
[lkml]   [2018]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
Hi Stefan,

On Fri, Aug 10, 2018 at 11:46:18AM +0300, Stefan Popa wrote:
> This patch adds basic support for Analog Devices ADXL372 SPI-Bus
> Three-Axis Digital Accelerometer.
>
> The device is probed and configured the with some initial default
> values. With this basic driver, it is possible to read raw acceleration
> data.
>
> Datasheet:
> http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
> ---
> MAINTAINERS | 6 +
> drivers/iio/accel/Kconfig | 11 +
> drivers/iio/accel/Makefile | 1 +
> drivers/iio/accel/adxl372.c | 525 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 543 insertions(+)
> create mode 100644 drivers/iio/accel/adxl372.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 60b1028..2ba47bb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -543,6 +543,12 @@ W: http://ez.analog.com/community/linux-device-drivers
> S: Supported
> F: drivers/input/misc/adxl34x.c
>
> +ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
> +M: Stefan Popa <stefan.popa@analog.com>
> +W: http://ez.analog.com/community/linux-device-drivers
> +S: Supported
> +F: drivers/iio/accel/adxl372.c
> +
> AF9013 MEDIA DRIVER
> M: Antti Palosaari <crope@iki.fi>
> L: linux-media@vger.kernel.org
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 62ae7e5..1b496ef 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -60,6 +60,17 @@ config ADXL345_SPI
> will be called adxl345_spi and you will also get adxl345_core
> for the core module.
>
> +config ADXL372
> + tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver"
> + depends on SPI
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + help
> + Say yes here to add support for the Analog Devices ADXL372 triaxial
> + acceleration sensor.
> + To compile this driver as a module, choose M here: the
> + module will be called adxl372.
> +
> config BMA180
> tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
> depends on I2C
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 636d4d1..5758ffc 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_ADIS16209) += adis16209.o
> obj-$(CONFIG_ADXL345) += adxl345_core.o
> obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
> obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
> +obj-$(CONFIG_ADXL372) += adxl372.o
> obj-$(CONFIG_BMA180) += bma180.o
> obj-$(CONFIG_BMA220) += bma220_spi.o
> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
> new file mode 100644
> index 0000000..db9ecd2
> --- /dev/null
> +++ b/drivers/iio/accel/adxl372.c
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*

The SPDX identifier "GPL-2.0+" is "GPL v2 or later", and the MODULE_LICENSE
"GPL v2" is "GPL v2 only"

See include/linux/module.h ::

* "GPL" [GNU Public License v2 or later]
* "GPL v2" [GNU Public License v2]


Please make them match :-)

[snip]

> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>

Best regards
Marcus Folkesson
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-08-10 20:23    [W:0.103 / U:0.228 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site