lkml.org 
[lkml]   [2018]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 38/40] arm64: dts: tegra186: Add SDHCI tap and trim values
Date
Add SDHCI inbound and outbound SDHCI sampling trimmer values for
Tegra186.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index b7020dd..3b2fe0d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -246,6 +246,8 @@
nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};

@@ -264,6 +266,8 @@
nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};

@@ -284,6 +288,8 @@
nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};

@@ -299,6 +305,8 @@
nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0x9>;
status = "disabled";
};

--
2.7.4
\
 
 \ /
  Last update: 2018-08-10 20:11    [W:0.146 / U:4.728 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site