lkml.org 
[lkml]   [2018]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 37/40] arm64: dts: tegra210: Add SDHCI tap and trim values
Date
Add SDHCI inbound and outbound SDHCI sampling trimmer values for
Tegra210.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 2a80f2b..0951acc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1055,6 +1055,8 @@
nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x2>;
+ nvidia,default-trim = <0x4>;
status = "disabled";
};

@@ -1068,6 +1070,8 @@
reset-names = "sdhci";
nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
status = "disabled";
};

@@ -1086,6 +1090,8 @@
nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x3>;
+ nvidia,default-trim = <0x3>;
status = "disabled";
};

@@ -1099,6 +1105,8 @@
reset-names = "sdhci";
nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
status = "disabled";
};

--
2.7.4
\
 
 \ /
  Last update: 2018-08-10 20:11    [W:0.097 / U:5.884 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site