lkml.org 
[lkml]   [2018]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 00/17] btrfs zoned block device support
From
Date
On 08/09/2018 08:04 PM, Naohiro Aota wrote:
> This series adds zoned block device support to btrfs.
>
> A zoned block device consists of a number of zones. Zones are either
> conventional and accepting random writes or sequential and requiring that
> writes be issued in LBA order from each zone write pointer position. This
> patch series ensures that the sequential write constraint of sequential
> zones is respected while fundamentally not changing BtrFS block and I/O
> management for block stored in conventional zones.
>
> To achieve this, the default dev extent size of btrfs is changed on zoned
> block devices so that dev extents are always aligned to a zone. Allocation
> of blocks within a block group is changed so that the allocation is always
> sequential from the beginning of the block groups. To do so, an allocation
> pointer is added to block groups and used as the allocation hint. The
> allocation changes also ensures that block freed below the allocation
> pointer are ignored, resulting in sequential block allocation regardless of
> the block group usage.
>
> While the introduction of the allocation pointer ensure that blocks will be
> allocated sequentially, I/Os to write out newly allocated blocks may be
> issued out of order, causing errors when writing to sequential zones. This
> problem s solved by introducing a submit_buffer() function and changes to
> the internal I/O scheduler to ensure in-order issuing of write I/Os for
> each chunk and corresponding to the block allocation order in the chunk.
>
> The zones of a chunk are reset to allow reusing of the zone only when the
> block group is being freed, that is, when all the extents of the block group
> are unused.
>
> For btrfs volumes composed of multiple zoned disks, restrictions are added
> to ensure that all disks have the same zone size. This matches the existing
> constraint that all dev extents in a chunk must have the same size.
>
> It requires zoned block devices to test the patchset. Even if you don't
> have zone devices, you can use tcmu-runner [1] to emulate zoned block
> devices. It can export emulated zoned block devices via iSCSI. Please see
> the README.md of tcmu-runner [2] for howtos to generate a zoned block
> device on tcmu-runner.
>
> [1] https://github.com/open-iscsi/tcmu-runner
> [2] https://github.com/open-iscsi/tcmu-runner/blob/master/README.md
>
> Patch 1 introduces the HMZONED incompatible feature flag to indicate that
> the btrfs volume was formatted for use on zoned block devices.
>
> Patches 2 and 3 implement functions to gather information on the zones of
> the device (zones type and write pointer position).
>
> Patch 4 restrict the possible locations of super blocks to conventional
> zones to preserve the existing update in-place mechanism for the super
> blocks.
>
> Patches 5 to 7 disable features which are not compatible with the sequential
> write constraints of zoned block devices. This includes fallocate and
> direct I/O support. Device replace is also disabled for now.
>
> Patches 8 and 9 tweak the extent buffer allocation for HMZONED mode to
> implement sequential block allocation in block groups and chunks.
>
> Patches 10 to 12 implement the new submit buffer I/O path to ensure sequential
> write I/O delivery to the device zones.
>
> Patches 13 to 16 modify several parts of btrfs to handle free blocks
> without breaking the sequential block allocation and sequential write order
> as well as zone reset for unused chunks.
>
> Finally, patch 17 adds the HMZONED feature to the list of supported
> features.
>
> Naohiro Aota (17):
> btrfs: introduce HMZONED feature flag
> btrfs: Get zone information of zoned block devices
> btrfs: Check and enable HMZONED mode
> btrfs: limit super block locations in HMZONED mode
> btrfs: disable fallocate in HMZONED mode
> btrfs: disable direct IO in HMZONED mode
> btrfs: disable device replace in HMZONED mode
> btrfs: align extent allocation to zone boundary
> btrfs: do sequential allocation on HMZONED drives
> btrfs: split btrfs_map_bio()
> btrfs: introduce submit buffer
> btrfs: expire submit buffer on timeout
> btrfs: avoid sync IO prioritization on checksum in HMZONED mode
> btrfs: redirty released extent buffers in sequential BGs
> btrfs: reset zones of unused block groups
> btrfs: wait existing extents before truncating
> btrfs: enable to mount HMZONED incompat flag
>
And unfortunately this series fails to boot for me:

BTRFS error (device nvme0n1p5): zoned devices mixed with regular devices
BTRFS error (device nvme0n1p5): failed to init hmzoned mode: -22
BTRFS error (device nvme0n1p5): open_ctree failed

Needless to say, /dev/nvme0n1p5 is _not_ a zoned device.
Nor has the zoned device a btrfs superblock ATM.

Cheers,

Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.com +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2018-08-10 09:27    [W:0.190 / U:14.420 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site