lkml.org 
[lkml]   [2018]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
Date
This patch adds the binding documentation for the HS/SS USB PHY found
inside Qualcomm Dakota SoCs.

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: John Crispin <john@phrozen.org>
---
.../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
new file mode 100644
index 000000000000..320a596c45b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
@@ -0,0 +1,21 @@
+Qualcom Dakota HS/SS USB PHY
+
+Required properties:
+ - compatible: "qcom,ipq4019-usb-ss-phy",
+ "qcom,ipq4019-usb-hs-phy"
+ - reg: offset and length of the registers
+ - #phy-cells: should be 0
+ - resets: the reset controllers as listed below
+ - reset-names: the names of the reset controllers
+ "por" - the POR reset line for SS and HS phys
+ "srif" - the SRIF reset line for HS phys
+Example:
+
+usb-phy@a8000 {
+ compatible = "qcom,ipq4019-usb-hs-phy";
+ phy-cells = <0>;
+ reg = <0xa8000 0x40>;
+ resets = <&gcc USB2_HSPHY_POR_ARES>,
+ <&gcc USB2_HSPHY_S_ARES>;
+ reset-names = "por", "srif";
+};
--
2.11.0
\
 
 \ /
  Last update: 2018-08-01 12:51    [W:0.060 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site