lkml.org 
[lkml]   [2018]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/10] dt-bindings: reset: Add Actions Semi S700 SoC RMU support
Date
Add RMU (Reset Management Unit) support for the Actions Semi S700
SoC which is a part of the Actions Semi Owl family series.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../bindings/reset/actions,owl-reset.txt | 8 +++--
include/dt-bindings/reset/actions,s700-rmu.h | 34 +++++++++++++++++++
2 files changed, 39 insertions(+), 3 deletions(-)
create mode 100644 include/dt-bindings/reset/actions,s700-rmu.h

diff --git a/Documentation/devicetree/bindings/reset/actions,owl-reset.txt b/Documentation/devicetree/bindings/reset/actions,owl-reset.txt
index 38e2c7051d86..a29950cb2db0 100644
--- a/Documentation/devicetree/bindings/reset/actions,owl-reset.txt
+++ b/Documentation/devicetree/bindings/reset/actions,owl-reset.txt
@@ -7,12 +7,14 @@ controller binding usage.
The RMU registers are part of the system-controller block on Owl SoCs.

Required properties:
-- compatible: Should be "actions,s900-rmu"
+- compatible: Should be one of the following,
+ "actions,s900-rmu"
+ "actions,s700-rmu"
- #reset-cells: Should be 1

All available resets are defined as preprocessor macros in corresponding
-dt-bindings/reset/actions,s900-rmu.h header and can be used in device
-tree sources.
+dt-bindings/reset/actions,s900-rmu.h or actions,s700-rmu.h header and can
+be used in device tree sources.

Parent node should have the following properties :
- compatible: "syscon", "simple-mfd"
diff --git a/include/dt-bindings/reset/actions,s700-rmu.h b/include/dt-bindings/reset/actions,s700-rmu.h
new file mode 100644
index 000000000000..8c5d4d1b8bd4
--- /dev/null
+++ b/include/dt-bindings/reset/actions,s700-rmu.h
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+//
+// Device Tree binding constants for Actions Semi S700 Reset Management Unit
+//
+// Copyright (c) 2018 Linaro Ltd.
+
+#ifndef _DT_BINDINGS_ACTIONS_S700_RESET_H
+#define _DT_BINDINGS_ACTIONS_S700_RESET_H
+
+#define S700_RESET_AUDIO 0
+#define S700_RESET_CSI 1
+#define S700_RESET_DE 2
+#define S700_RESET_DSI 3
+#define S700_RESET_GPIO 4
+#define S700_RESET_I2C0 5
+#define S700_RESET_I2C1 6
+#define S700_RESET_I2C2 7
+#define S700_RESET_I2C3 8
+#define S700_RESET_KEY 9
+#define S700_RESET_LCD0 10
+#define S700_RESET_SI 11
+#define S700_RESET_SPI0 12
+#define S700_RESET_SPI1 13
+#define S700_RESET_SPI2 14
+#define S700_RESET_SPI3 15
+#define S700_RESET_UART0 16
+#define S700_RESET_UART1 17
+#define S700_RESET_UART2 18
+#define S700_RESET_UART3 19
+#define S700_RESET_UART4 20
+#define S700_RESET_UART5 21
+#define S700_RESET_UART6 22
+
+#endif /* _DT_BINDINGS_ACTIONS_S700_RESET_H */
--
2.17.1
\
 
 \ /
  Last update: 2018-08-01 05:42    [W:0.158 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site