lkml.org 
[lkml]   [2018]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v2 5/6] spi: Add QuadSPI driver for Atmel SAMA5D2
Hi Mark,

On Wed, 1 Aug 2018 18:27:47 +0100
Mark Brown <broonie@kernel.org> wrote:

> On Wed, Jun 27, 2018 at 03:16:08PM +0200, Piotr Bugalski wrote:
> > Kernel contains QSPI driver strongly tied to MTD and nor-flash memory.
> > New spi-mem interface allows usage also other memory types, especially
> > much larger NAND with SPI interface. This driver works as SPI controller
> > and is not related to MTD, however can work with NAND-flash or other
> > peripherals using spi-mem interface.
>
> This is fine from a SPI point of view

Cool. There are still 2 things I think should be addressed before
merging the driver:
1/ Fixing the SoB tag to match the author (problem reported by
Alexandre)
2/ Getting this patch [1] merged and implementing the ->get_name() hook
in this driver so that SPI NOR devs declared to the MTD layer keep
the same name after the transition to spi-mem and mtdparts= passed on
the cmdline keep working. Without this in place we're likely to
break a few setups :-/.

> but I'd like to apply it directly
> to the SPI tree rather than ack it for merge via the MTD tree - can we
> work something out with a shared branch or something?

Sure, I can provide an immutable tag for you to pull and I'll add my
acks on those patches once the 2 things I mentioned above are
addressed.

Regards,

Boris

[1]https://patchwork.kernel.org/patch/10508693/

\
 
 \ /
  Last update: 2018-08-01 21:58    [W:1.477 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site