lkml.org 
[lkml]   [2018]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 6/6] crypto: qcom: Add ACPI support
Date
From: Timur Tabi <timur@codeaurora.org>

Add support for probing on ACPI systems, with ACPI HID QCOM8160.

On ACPI systems, clocks are always enabled, the PRNG should
already be enabled, and the register region is read-only.
The driver only verifies that the hardware is already
enabled never tries to disable or configure it.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
[port to crypto API]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/crypto/qcom-rng.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index f1bd86acaf9d..8118d4cd93b2 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -4,6 +4,7 @@
// Based on msm-rng.c and downstream driver

#include <crypto/internal/rng.h>
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/crypto.h>
#include <linux/module.h>
@@ -168,13 +169,17 @@ static int qcom_rng_probe(struct platform_device *pdev)
if (IS_ERR(rng->base))
return PTR_ERR(rng->base);

- rng->clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(rng->clk))
- return PTR_ERR(rng->clk);

- rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
+ /* ACPI systems have clk already on, so skip clk_get */
+ if (!has_acpi_companion(&pdev->dev)) {
+ rng->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(rng->clk))
+ return PTR_ERR(rng->clk);
+ }

+ rng->skip_init = (unsigned long)device_get_match_data(&pdev->dev);
qcom_rng_dev = rng;
+
ret = crypto_register_rng(&qcom_rng_alg);
if (ret) {
dev_err(&pdev->dev, "Register crypto rng failed: %d\n", ret);
@@ -193,6 +198,14 @@ static int qcom_rng_remove(struct platform_device *pdev)
return 0;
}

+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qcom_rng_acpi_match[] = {
+ { .id = "QCOM8160", .driver_data = 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
+#endif
+
static const struct of_device_id qcom_rng_of_match[] = {
{ .compatible = "qcom,prng", .data = (void *)0},
{ .compatible = "qcom,prng-ee", .data = (void *)1},
@@ -206,6 +219,7 @@ static struct platform_driver qcom_rng_driver = {
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = of_match_ptr(qcom_rng_of_match),
+ .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
}
};
module_platform_driver(qcom_rng_driver);
--
2.14.4
\
 
 \ /
  Last update: 2018-07-09 08:21    [W:0.073 / U:0.384 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site