lkml.org 
[lkml]   [2018]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] remoteproc: qcom: Introduce Non-PAS ADSP PIL driver
From
Date
Thanks Rob for reviewing.


On 7/7/2018 2:02 AM, Rob Herring wrote:
> On Fri, Jun 29, 2018 at 02:50:53PM +0530, Rohit kumar wrote:
>> This adds APSS based ADSP PIL driver for QCOM SoCs.
>> Added initial support for SDM845 with ADSP bootup and
>> shutdown operation handled from Application Processor
>> SubSystem(APSS).
>>
>> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
>> ---
>> Changes since v1:
>> - Used APIs from qcom_q6v5.c
>> - Use clock, reset and regmap driver APIs instead of
>> directly writing into the LPASS registers.
>> - Created new file for non PAS ADSP PIL instead of extending
>> existing ADSP PIL driver.
>> - cleanups as suggested by Bjorn and Rob.
>>
>> .../bindings/remoteproc/qcom,non-pas-adsp.txt | 138 +++++
> This should be a separate patch.

Ok. Will separate it in next spin.
>> drivers/remoteproc/Kconfig | 18 +
>> drivers/remoteproc/Makefile | 1 +
>> drivers/remoteproc/qcom_nonpas_adsp_pil.c | 667 +++++++++++++++++++++
>> 4 files changed, 824 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>> create mode 100644 drivers/remoteproc/qcom_nonpas_adsp_pil.c
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>> new file mode 100644
>> index 0000000..0581aaa
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>> @@ -0,0 +1,138 @@
>> +Qualcomm Technology Inc. Non PAS ADSP Peripheral Image Loader
>> +
>> +This document defines the binding for a component that loads and boots firmware
>> +on the Qualcomm Technology Inc. ADSP Hexagon core.
>> +
>> +- compatible:
>> + Usage: required
>> + Value type: <string>
>> + Definition: must be one of:
>> + "qcom,sdm845-apss-adsp-pil"
> Didn't Bjorn say to drop the 'apss' part?

Yes, he had asked to rename compatible string for  existing PIL driver
as "qcom,platform-subsystem-pas"
and non-pas pil driver as "qcom,platform-subsystem-pil". I wanted to get
confirmation from Bjorn whether
we should rename the filename too.
@Bjorn, can you please suggest filename and compatible strings for the
two drivers.
>> +
>> +- reg:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: must specify the base address and size of the qdsp6ss
>> +
>> +- reg-names:
>> + Usage: required
>> + Value type: <stringlist>
>> + Definition: must be "qdsp6ss"
>> +
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

Thanks,
Rohit

--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2018-07-09 08:01    [W:0.085 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site