[lkml]   [2018]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 3/3] pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant
On Tue, Jul 3, 2018 at 1:00 AM Douglas Anderson <> wrote:

> If you do this on an sdm845 board:
> grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups
> looks like nonsense. For every pin you see listed:
> input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ...
> That's because pmic_gpio_config_get() isn't complying with the rules
> that pinconf_generic_dump_one() expects. Specifically for boolean
> parameters (anything with a "struct pin_config_item" where has_arg is
> false) the function expects that the function should return its value
> not through the "config" parameter but should return "0" if the value
> is set and "-EINVAL" if the value isn't set.
> Let's fix this.
> From a quick sample of other pinctrl drivers, it appears to be
> tradition to also return 1 through the config parameter for these
> boolean parameters when they exist. I'm not one to knock tradition,
> so I'll follow tradition and return 1 in these cases. While I'm at
> it, I'll also continue searching for four leaf clovers, kocking on
> wood three times, and trying not to break mirrors.
> NOTE: This also fixes an apparent typo for reading
> PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally
> using "=" instead of "==" and thus was setting some internal
> state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops.
> Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
> Signed-off-by: Douglas Anderson <>

Patch applied, same thing. Stays in unless Bjorn has some

Linus Walleij

 \ /
  Last update: 2018-07-09 13:18    [W:0.053 / U:1.688 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site