Messages in this thread | | | Date | Tue, 10 Jul 2018 10:52:30 +0900 (JST) | Subject | Re: [RFC PATCH 0/1] net: phy: skip autoneg of ethernet(fec) on network boot | From | Masahiko KIMOTO <> |
| |
> > > I completely acknowledge and support the use case, but your > > > implementation is definitively not the way to go. In my experience the > > > problem is usually that there may be a disagreement on the > > > Pause/Asym_Pause advertisement bits and that alone is responsible for > > > triggering a re-negotiation. Can yo check if that is the case here? > > > > Thank you for your support. > > > > Concening the problem about PAUSE/Asym_PAUSE advertisement you pointed out, > > I could not understand your consideration. > > > > Would you tell me more detail about it? > > Hi Masahiko > > You said that the PHY is being configured 3 times, and might be doing > auto-neg three times. Often a phy will not actually perform auto-neg, > or do it much faster, if the advertised bits do not change with each > re-configuration. > > So check how u-boot is configuring what is advertised, and look at > what Linux is configuring. In particularly, look at the pause > configuration. If pause is configured different in u-boot and Linux, > try to make it the same. Things might go faster than.
Thank you.
I'll try to check out u-boot side by mii command and Linux(server) side by ethtool.
--------------------------------------------------------------------------- Masahiko KIMOTO,Ph.D. / Cybertrust Japan Co., Ltd. mail: masahiko.kimoto@cybertrust.co.jp web: https://www.cybertrust.co.jp/ https://www.miraclelinux.com/
| |