lkml.org 
[lkml]   [2018]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] MIPS: jz4740: Bump zload address
Date
Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.

This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.

To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.

This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/jz4740/Platform | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
index 28448d358c10..a2a5a85ea1f9 100644
--- a/arch/mips/jz4740/Platform
+++ b/arch/mips/jz4740/Platform
@@ -1,4 +1,4 @@
platform-$(CONFIG_MACH_INGENIC) += jz4740/
cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000
-zload-$(CONFIG_MACH_INGENIC) += 0xffffffff80600000
+zload-$(CONFIG_MACH_INGENIC) += 0xffffffff81000000
--
2.18.0
\
 
 \ /
  Last update: 2018-07-08 17:08    [W:0.028 / U:35.708 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site