Messages in this thread Patch in this message | | | From | Icenowy Zheng <> | Subject | [PATCH v2 9/9] arm64: allwinner: dts: h6: enable USB3 port on Pine H64 | Date | Fri, 6 Jul 2018 23:38:05 +0800 |
| |
Pine H64 board have a USB3 port, which is connected to the USB3 pins of the H6 SoC, and the 5V power supply is controlled via GPIO (shared with the power USB ports).
Enable this port.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- Changes in v2: - Rebased on top of the USB2 support patches. - Dropped the enable of the dwc3-of-simple node.
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 104369228994..28eeb8dcfa35 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -51,6 +51,10 @@ }; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -93,3 +97,8 @@ usb3_vbus-supply = <®_usb_vbus>; status = "okay"; }; + +&usb3phy { + phy-supply = <®_usb_vbus>; + status = "okay"; +}; -- 2.17.1
| |