lkml.org 
[lkml]   [2018]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 16/19] csky: SMP support
On Fri, Jul 06, 2018 at 06:24:33AM +0100, Mark Rutland wrote:
> > + if (cpu >= NR_CPUS)
> > + goto error;
> > +
> > + if (of_property_read_string(node, "status", &status))
> > + status = "enable";
> > +
> > + if (strcmp(status, "disable") == 0)
> > + goto error;
>
> Please use of_device_is_available(node);
Ok.

> "enable" is not a sensible value for
> the status property, and "disable" (rather than "disabled") is simply unusual.
>
> Neither "enable" nor "disable" are correct values for the status property.

cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
reg = <0>;
status = "on";
};

cpu@1 {
device_type = "cpu";
reg = <1>;
status = "off";
};
};

> What is the value in the reg property, exactly?
See above, I'll remove the reg property and it's no use.

> Is there a unique ID in
> hardware for each CPU in the system?
There is no unique ID in current CPU: ck860.

>
> It would be good to document this, e.g. as arm does in
> Documentation/devicetree/bindings/arm/cpus.txt
Ok.

> > +
> > + return cpu;
> > +error:
> > + return -ENODEV;
> > +}
> > +
> > +void __init setup_smp(void)
> > +{
> > + struct device_node *node = NULL;
> > + int cpu;
> > +
> > + while ((node = of_find_node_by_type(node, "cpu"))) {
> > + cpu = csky_of_cpu(node);
> > + if (cpu >= 0) {
> > + set_cpu_possible(cpu, true);
> > + set_cpu_present(cpu, true);
> > + }
> > + }
> > +}
>
> What happens if/when the value in the reg property is larger than NR_CPUS?
Bug. I'll add NR_CPUS limit.

> > +int __cpu_up(unsigned int cpu, struct task_struct *tidle)
> > +{
> > + unsigned int tmp;
> > +
> > + secondary_stack = (unsigned int)tidle->stack + THREAD_SIZE;
> > +
> > + secondary_hint = mfcr("cr31");
> > +
> > + secondary_ccr = mfcr("cr18");
> > +
> > + pr_info("%s: CPU%u\n", __func__, cpu);
> > +
> > + tmp = mfcr("cr<29, 0>");
> > + tmp |= 1 << cpu;
> > + mtcr("cr<29, 0>", tmp);
> > +
> > + while (!cpu_online(cpu));
> > +
> > + secondary_stack = 0;
> > +
> > + return 0;
> > +}
>
> I don't see a start address being setup here, so I assume that CPUs branch to a
> fixed address out-of-reset. Does that mean that the kernel has to be loaded at
> a particular physical address on a given platform?
No, not a fixed address. I put it arch/csky/kernel/traps.c:79-83
trap_init()
#ifdef CONFIG_SMP
mtcr("cr<28, 0>", virt_to_phys(vec_base));

VEC_INIT(VEC_RESET, (void *)virt_to_phys(_start_smp_secondary));
#endi

Guo Ren

\
 
 \ /
  Last update: 2018-07-06 13:33    [W:0.146 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site