lkml.org 
[lkml]   [2018]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v2] drm/arm/malidp: Added support for AFBC modifiers for all layers except DE_SMART
On Thu, Jul 05, 2018 at 03:25:43PM +0100, Ayan Kumar Halder wrote:
> On planes which support AFBC, expose an AFBC modifier for use with BGR888.
>
> Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
> Reviewed-by: Brian Starkey <brian.starkey@arm.com>
> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
>
> Changes from v2:
> - Removed the gerrit change-id
> - Replaced DRM_ERROR() with DRM_DEBUG_KMS() in malidp_format_mod_supported()
> to report unsupported modifiers.
> ---
> drivers/gpu/drm/arm/malidp_drv.c | 1 +
> drivers/gpu/drm/arm/malidp_planes.c | 46 +++++++++++++++++++++++++++++++++++--
> 2 files changed, 45 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
> index 7b6a848..7bcd679 100644
> --- a/drivers/gpu/drm/arm/malidp_drv.c
> +++ b/drivers/gpu/drm/arm/malidp_drv.c
> @@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm)
> drm->mode_config.max_height = hwdev->max_line_size;
> drm->mode_config.funcs = &malidp_mode_config_funcs;
> drm->mode_config.helper_private = &malidp_mode_config_helpers;
> + drm->mode_config.allow_fb_modifiers = true;
>
> ret = malidp_crtc_init(drm);
> if (ret) {
> diff --git a/drivers/gpu/drm/arm/malidp_planes.c b/drivers/gpu/drm/arm/malidp_planes.c
> index 3950504..914cc58 100644
> --- a/drivers/gpu/drm/arm/malidp_planes.c
> +++ b/drivers/gpu/drm/arm/malidp_planes.c
> @@ -124,6 +124,35 @@ static void malidp_plane_atomic_print_state(struct drm_printer *p,
> drm_printf(p, "\tn_planes=%u\n", ms->n_planes);
> }
>
> +static bool malidp_format_mod_supported(struct drm_plane *plane,
> + u32 format, u64 modifier)
> +{
> + if (WARN_ON(modifier == DRM_FORMAT_MOD_INVALID))
> + return false;
> +
> + /* All the pixel formats are supported without any modifier */
> + if (modifier == DRM_FORMAT_MOD_LINEAR)
> + return true;
> +
> + if ((modifier >> 56) != DRM_FORMAT_MOD_VENDOR_ARM)
> + return false;
> +
> + if (modifier &
> + ~DRM_FORMAT_MOD_ARM_AFBC(AFBC_MOD_VALID_BITS)) {
> + DRM_DEBUG_KMS("Unsupported modifiers\n");
> + return false;
> + }

I think the core checks for that by now, or at least Ville had some
patches to make that happen ...

I also don't see the ARM_AFBC modifier in upstream yet, is that still
in-flight somewhere?
-Daniel

> +
> + switch (modifier) {
> + case DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> + AFBC_FORMAT_MOD_YTR |
> + AFBC_FORMAT_MOD_SPARSE):
> + if (format == DRM_FORMAT_BGR888)
> + return true;
> + }
> + return false;
> +}
> +
> static const struct drm_plane_funcs malidp_de_plane_funcs = {
> .update_plane = drm_atomic_helper_update_plane,
> .disable_plane = drm_atomic_helper_disable_plane,
> @@ -132,6 +161,7 @@ static const struct drm_plane_funcs malidp_de_plane_funcs = {
> .atomic_duplicate_state = malidp_duplicate_plane_state,
> .atomic_destroy_state = malidp_destroy_plane_state,
> .atomic_print_state = malidp_plane_atomic_print_state,
> + .format_mod_supported = malidp_format_mod_supported,
> };
>
> static int malidp_se_check_scaling(struct malidp_plane *mp,
> @@ -524,6 +554,13 @@ int malidp_de_planes_init(struct drm_device *drm)
> u32 *formats;
> int ret, i, j, n;
>
> + static const u64 modifiers[] = {
> + DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> + AFBC_FORMAT_MOD_YTR | AFBC_FORMAT_MOD_SPARSE),
> + DRM_FORMAT_MOD_LINEAR,
> + DRM_FORMAT_MOD_INVALID
> + };
> +
> formats = kcalloc(map->n_pixel_formats, sizeof(*formats), GFP_KERNEL);
> if (!formats) {
> ret = -ENOMEM;
> @@ -547,9 +584,14 @@ int malidp_de_planes_init(struct drm_device *drm)
>
> plane_type = (i == 0) ? DRM_PLANE_TYPE_PRIMARY :
> DRM_PLANE_TYPE_OVERLAY;
> +
> + /*
> + * All the layers except smart layer supports AFBC modifiers.
> + */
> ret = drm_universal_plane_init(drm, &plane->base, crtcs,
> - &malidp_de_plane_funcs, formats,
> - n, NULL, plane_type, NULL);
> + &malidp_de_plane_funcs, formats, n,
> + (id == DE_SMART) ? NULL : modifiers, plane_type, NULL);
> +
> if (ret < 0)
> goto cleanup;
>
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2018-07-05 17:48    [W:0.074 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site