lkml.org 
[lkml]   [2018]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v4 1/3] iio: hx711: add clock-frequency property in DT
Add clock-frequency property for hx711 ADC

This is the frequency of PD_SCK. It affects only the high value duration
since low value duration is not relevant and we are not able to switch
faster than the minimum duration specified.

After PD_SCK goes high DOUT is read just before PD_SCK goes down again.
This is necessary because of parasitic capacities on the wiring.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
---
Documentation/devicetree/bindings/iio/adc/avia-hx711.txt | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
index b3629405f568..4bee51d536e1 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
@@ -8,11 +8,21 @@ Required properties:
See Documentation/devicetree/bindings/gpio/gpio.txt
- avdd-supply: Definition of the regulator used as analog supply

+Optional properties:
+ - clock-frequency: Frequency of PD_SCK
+ This setting affects the duration of the high value
+ phase of the clock (PD_SCK). The low value phase is
+ not affected since it is not relevant for the
+ measurement.
+ Minimum value allowed is 20 kHz because of maximum
+ high time of 50 microseconds.
+
Example:
weight@0 {
compatible = "avia,hx711";
sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
avdd-suppy = <&avdd>;
+ clock-frequency = <100000>;
};

--
2.1.4
\
 
 \ /
  Last update: 2018-07-04 14:38    [W:0.042 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site