lkml.org 
[lkml]   [2018]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] net: ethernet: Add missing VENDOR to Cadence and Packet Engines symbols
Date
The vendor guard Kconfig symbols for Cadence and Packet Engines use a
"NET_" prefix, while all other vendor guards use a "NET_VENDOR_"
prefix. Hence make them consistent with the rest, and add the missing
trailing "S" for Packet Engines while at it.

As these options don't directly affect the kernel build, and default to
"y", this change has no impact on kernels built with existing
(def)configs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/net/ethernet/Makefile | 4 ++--
drivers/net/ethernet/cadence/Kconfig | 6 +++---
drivers/net/ethernet/packetengines/Kconfig | 6 +++---
3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8fbfe9ce2fa53a69..0c3ab7efff8c9ddb 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_NET_VENDOR_AQUANTIA) += aquantia/
obj-$(CONFIG_NET_VENDOR_ARC) += arc/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
obj-$(CONFIG_NET_VENDOR_AURORA) += aurora/
-obj-$(CONFIG_NET_CADENCE) += cadence/
+obj-$(CONFIG_NET_VENDOR_CADENCE) += cadence/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/
@@ -68,7 +68,7 @@ obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/
obj-$(CONFIG_LPC_ENET) += nxp/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
obj-$(CONFIG_ETHOC) += ethoc.o
-obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
+obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 427d65a1a1261095..b9984015ca8c1a68 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -2,7 +2,7 @@
# Atmel device configuration
#

-config NET_CADENCE
+config NET_VENDOR_CADENCE
bool "Cadence devices"
depends on HAS_IOMEM
default y
@@ -16,7 +16,7 @@ config NET_CADENCE
the remaining Atmel network card questions. If you say Y, you will be
asked for your specific card in the following questions.

-if NET_CADENCE
+if NET_VENDOR_CADENCE

config MACB
tristate "Cadence MACB/GEM support"
@@ -48,4 +48,4 @@ config MACB_PCI
To compile this driver as a module, choose M here: the module
will be called macb_pci.

-endif # NET_CADENCE
+endif # NET_VENDOR_CADENCE
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
index b5ea2a56106ef3c8..1df28f2edd1f9b05 100644
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -2,7 +2,7 @@
# Packet engine device configuration
#

-config NET_PACKET_ENGINE
+config NET_VENDOR_PACKET_ENGINES
bool "Packet Engine devices"
default y
depends on PCI
@@ -14,7 +14,7 @@ config NET_PACKET_ENGINE
the questions about packet engine devices. If you say Y, you will
be asked for your specific card in the following questions.

-if NET_PACKET_ENGINE
+if NET_VENDOR_PACKET_ENGINES

config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
@@ -40,4 +40,4 @@ config YELLOWFIN
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.

-endif # NET_PACKET_ENGINE
+endif # NET_VENDOR_PACKET_ENGINES
--
2.17.1
\
 
 \ /
  Last update: 2018-07-04 13:51    [W:0.075 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site