lkml.org 
[lkml]   [2018]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH] watchdog: sp805: Add clock-frequency property
Date
When using ACPI node, binding clock devices are
not available as device tree, So clock-frequency
property given in _DSD object of ACPI device is
used to calculate Watchdog rate.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/watchdog/sp805_wdt.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9849db0..d830dbc 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -22,6 +22,7 @@
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -65,6 +66,7 @@ struct sp805_wdt {
spinlock_t lock;
void __iomem *base;
struct clk *clk;
+ u64 rate;
struct amba_device *adev;
unsigned int load_val;
};
@@ -80,7 +82,10 @@ static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
u64 load, rate;

- rate = clk_get_rate(wdt->clk);
+ if (wdt->rate)
+ rate = wdt->rate;
+ else
+ rate = clk_get_rate(wdt->clk);

/*
* sp805 runs counter with given value twice, after the end of first
@@ -108,7 +113,10 @@ static unsigned int wdt_timeleft(struct watchdog_device *wdd)
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
u64 load, rate;

- rate = clk_get_rate(wdt->clk);
+ if (wdt->rate)
+ rate = wdt->rate;
+ else
+ rate = clk_get_rate(wdt->clk);

spin_lock(&wdt->lock);
load = readl_relaxed(wdt->base + WDTVALUE);
@@ -230,11 +238,22 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)

wdt->clk = devm_clk_get(&adev->dev, NULL);
if (IS_ERR(wdt->clk)) {
- dev_warn(&adev->dev, "Clock not found\n");
- ret = PTR_ERR(wdt->clk);
- goto err;
+ dev_warn(&adev->dev, "Clock device not found\n");
+ wdt->clk = NULL;
+ /*
+ * When Driver probe with ACPI device, clock devices
+ * are not available, so watchdog rate get from
+ * clock-frequency property given in _DSD object.
+ */
+ device_property_read_u64(&adev->dev, "clock-frequency",
+ &wdt->rate);
+ if (!wdt->rate) {
+ ret = -ENODEV;
+ goto err;
+ }
}

+
wdt->adev = adev;
wdt->wdd.info = &wdt_info;
wdt->wdd.ops = &wdt_ops;
--
2.7.4
\
 
 \ /
  Last update: 2018-07-05 05:25    [W:0.138 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site