lkml.org 
[lkml]   [2018]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
    On 30/07/2018 14:43:47+0200, Quentin Schulz wrote:
    > HSIO register address space should be handled outside of the MAC
    > controller as there are some registers for PLL5 configuring,
    > SerDes/switch port muxing and a thermal sensor IP, so let's remove it.
    >
    > Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
    Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

    > ---
    > Documentation/devicetree/bindings/mips/mscc.txt | 16 ++++++++++++-
    > Documentation/devicetree/bindings/net/mscc-ocelot.txt | 9 ++-----
    > 2 files changed, 19 insertions(+), 6 deletions(-)
    >
    > diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
    > index ae15ec3..bc817e9 100644
    > --- a/Documentation/devicetree/bindings/mips/mscc.txt
    > +++ b/Documentation/devicetree/bindings/mips/mscc.txt
    > @@ -41,3 +41,19 @@ Example:
    > compatible = "mscc,ocelot-cpu-syscon", "syscon";
    > reg = <0x70000000 0x2c>;
    > };
    > +
    > +o HSIO regs:
    > +
    > +The SoC has a few registers (HSIO) handling miscellaneous functionalities:
    > +configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
    > +status, SerDes muxing and a thermal sensor.
    > +
    > +Required properties:
    > +- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
    > +- reg : Should contain registers location and length
    > +
    > +Example:
    > + syscon@10d0000 {
    > + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
    > + reg = <0x10d0000 0x10000>;
    > + };
    > diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
    > index 0a84711..9e5c17d 100644
    > --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
    > +++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
    > @@ -12,7 +12,6 @@ Required properties:
    > - "sys"
    > - "rew"
    > - "qs"
    > - - "hsio"
    > - "qsys"
    > - "ana"
    > - "portX" with X from 0 to the number of last port index available on that
    > @@ -45,7 +44,6 @@ Example:
    > reg = <0x1010000 0x10000>,
    > <0x1030000 0x10000>,
    > <0x1080000 0x100>,
    > - <0x10d0000 0x10000>,
    > <0x11e0000 0x100>,
    > <0x11f0000 0x100>,
    > <0x1200000 0x100>,
    > @@ -59,10 +57,9 @@ Example:
    > <0x1280000 0x100>,
    > <0x1800000 0x80000>,
    > <0x1880000 0x10000>;
    > - reg-names = "sys", "rew", "qs", "hsio", "port0",
    > - "port1", "port2", "port3", "port4", "port5",
    > - "port6", "port7", "port8", "port9", "port10",
    > - "qsys", "ana";
    > + reg-names = "sys", "rew", "qs", "port0", "port1", "port2",
    > + "port3", "port4", "port5", "port6", "port7",
    > + "port8", "port9", "port10", "qsys", "ana";
    > interrupts = <21 22>;
    > interrupt-names = "xtr", "inj";
    >
    > --
    > git-series 0.9.1

    --
    Alexandre Belloni, Bootlin (formerly Free Electrons)
    Embedded Linux and Kernel engineering
    https://bootlin.com

    \
     
     \ /
      Last update: 2018-07-31 09:53    [W:2.798 / U:0.244 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site