lkml.org 
[lkml]   [2018]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH mmc-next v3 1/3] mmc: sdhci: add adma_table_num member to struct sdhci_host
This patch adds adma_table_num member to struct sdhci_host to give more
flexibility to drivers to control the ADMA table number.

Default value of adma_table_num is set to (SDHCI_MAX_SEGS * 2 + 1).

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
drivers/mmc/host/sdhci.c | 17 +++++++++--------
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a7b5602ef6f7..14dd4a49e03b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3316,6 +3316,13 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,

host->sdma_boundary = SDHCI_DEFAULT_BOUNDARY_ARG;

+ /*
+ * The DMA descriptor table number is calculated as the maximum
+ * number of segments times 2, to allow for an alignment
+ * descriptor for each segment, plus 1 for a nop end descriptor.
+ */
+ host->adma_table_num = SDHCI_MAX_SEGS * 2 + 1;
+
return host;
}

@@ -3561,18 +3568,12 @@ int sdhci_setup_host(struct sdhci_host *host)
dma_addr_t dma;
void *buf;

- /*
- * The DMA descriptor table size is calculated as the maximum
- * number of segments times 2, to allow for an alignment
- * descriptor for each segment, plus 1 for a nop end descriptor,
- * all multipled by the descriptor size.
- */
if (host->flags & SDHCI_USE_64_BIT_DMA) {
- host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ host->adma_table_sz = host->adma_table_num *
SDHCI_ADMA2_64_DESC_SZ;
host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
} else {
- host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ host->adma_table_sz = host->adma_table_num *
SDHCI_ADMA2_32_DESC_SZ;
host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 23966f887da6..d55fd7033e93 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -563,6 +563,8 @@ struct sdhci_host {
/* Host SDMA buffer boundary. */
u32 sdma_boundary;

+ u32 adma_table_num;
+
u64 data_timeout;

unsigned long private[0] ____cacheline_aligned;
--
2.18.0
\
 
 \ /
  Last update: 2018-07-30 04:47    [W:0.032 / U:1.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site