lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v22 4/4] soc: mediatek: Add Mediatek CMDQ helper
From
Date
Hi, Houlong:

On Wed, 2018-07-04 at 08:47 +0800, houlong wei wrote:
> On Fri, 2018-06-29 at 17:22 +0800, CK Hu wrote:
> > Hi, Houlong:
> >
> > On Fri, 2018-06-29 at 07:32 +0800, houlong wei wrote:
> > > On Thu, 2018-06-28 at 18:41 +0800, CK Hu wrote:
> > > > Hi, Houlong:
> > > >
> > > > Some inline comment.
> > > >
> > > > On Wed, 2018-06-27 at 19:16 +0800, Houlong Wei wrote:
> > > > > Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
> > > > >
> > > > > Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
> > > > > Signed-off-by: HS Liao <hs.liao@mediatek.com>
> > > > > ---
> > > > > drivers/soc/mediatek/Kconfig | 12 ++
> > > > > drivers/soc/mediatek/Makefile | 1 +
> > > > > drivers/soc/mediatek/mtk-cmdq-helper.c | 258 ++++++++++++++++++++++++++++++++
> > > > > include/linux/soc/mediatek/mtk-cmdq.h | 132 ++++++++++++++++
> > > > > 4 files changed, 403 insertions(+)
> > > > > create mode 100644 drivers/soc/mediatek/mtk-cmdq-helper.c
> > > > > create mode 100644 include/linux/soc/mediatek/mtk-cmdq.h
> > > > >
> > > > > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> > > > > index a7d0667..17bd759 100644
> > > > > --- a/drivers/soc/mediatek/Kconfig
> > > > > +++ b/drivers/soc/mediatek/Kconfig
> > > > > @@ -4,6 +4,18 @@
> > > > > menu "MediaTek SoC drivers"
> > > > > depends on ARCH_MEDIATEK || COMPILE_TEST
> > > > >
> > > >
> >
> > [...]
> >
> > > > > +
> > > > > +static int cmdq_pkt_finalize(struct cmdq_pkt *pkt)
> > > > > +{
> > > > > + int err;
> > > > > +
> > > > > + if (cmdq_pkt_is_finalized(pkt))
> > > > > + return 0;
> > > > > +
> > > > > + /* insert EOC and generate IRQ for each command iteration */
> > > > > + err = cmdq_pkt_append_command(pkt, CMDQ_CODE_EOC, 0, CMDQ_EOC_IRQ_EN);
> > > > > + if (err < 0)
> > > > > + return err;
> > > > > +
> > > > > + /* JUMP to end */
> > > > > + err = cmdq_pkt_append_command(pkt, CMDQ_CODE_JUMP, 0, CMDQ_JUMP_PASS);
> > > > > + if (err < 0)
> > > > > + return err;
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +int cmdq_pkt_flush_async(struct cmdq_client *client, struct cmdq_pkt *pkt,
> > > > > + cmdq_async_flush_cb cb, void *data)
> > > > > +{
> > > > > + int err;
> > > > > + struct device *dev;
> > > > > + dma_addr_t dma_addr;
> > > > > +
> > > > > + err = cmdq_pkt_finalize(pkt);
> > > > > + if (err < 0)
> > > > > + return err;
> > > > > +
> > > > > + dev = client->chan->mbox->dev;
> > > > > + dma_addr = dma_map_single(dev, pkt->va_base, pkt->cmd_buf_size,
> > > > > + DMA_TO_DEVICE);
> > > >
> > > > You map here, but I could not find unmap, so the unmap should be done in
> > > > client driver. I would prefer a symmetric map/unmap which means that
> > > > both map and unmap are done in client driver. I think you put map here
> > > > because you should map after finalize.
> > >
> > > The unmap is done before callback to client, in function
> > > cmdq_task_exec_done, mtk-cmdq-mailbox.c.
> >
> > You put unmap in mailbox controller, and map here (here would be mailbox
> > client), so this is not symmetric. If the code is asymmetric, it's easy
> > to cause bug and not easy to maintain. So I would like move both
> > map/unmap to client driver.
> >
>
> Since map/unmap is common code for client drivers, can we move unmap to
> CMDQ helper and do not put in client driver?
>
> > >
> > > > Therefore, export
> > > > cmdq_pkt_finalize() to client driver and let client do finalize, so
> > > > there is no finalize in flush function. This method have a benefit that
> > > > if client reuse command buffer, it need not to map/unmap frequently.
> > >
> > > If client reuse command buffer or cmdq_pkt(command queue packet), client
> > > will add new commands to the cmdq_pkt, so map/unmap are necessary for
> > > each cmdq_pkt flush.
> >
> > If the buffer size is 4K bytes, client driver could map the whole 4K at
> > initialization. Before it write new command, it call
> > dma_sync_single_for_cpu(), after it write new command, it call
> > dma_sync_single_for_device(). And then it could flush this buffer to
> > mailbox controller. So client driver just call dma sync function when it
> > reuse the command buffer. dma sync function is much lightweight then dma
> > map because map would search the memory area which could be mapped.
> >
> > Regards,
> > CK
>
> Maybe we can do dma map/unmap/sync in cmdq helper, and make client
> driver simple.
>

Why are map/unmap common code for client drivers? I've mentioned that
some client driver may just call dma sync function before flush, so it
does not map for every flush. Frequently map/unmap has some drawback:

1. Waste CPU resource: this also waste power.
2. Risk of mapping fail: to reduce this risk, client driver could map at
initialization.

I think reducing these drawback is more important than making client
driver simple.

Regards,
CK

> >
> > >
> > > >
> > > > Regards,
> > > > CK
> > > >
> > > > > + if (dma_mapping_error(dev, dma_addr)) {
> > > > > + dev_err(client->chan->mbox->dev, "dma map failed\n");
> > > > > + return -ENOMEM;
> > > > > + }
> > > > > +
> > > > > + pkt->pa_base = dma_addr;
> > > > > + pkt->cb.cb = cb;
> > > > > + pkt->cb.data = data;
> > > > > +
> > > > > + mbox_send_message(client->chan, pkt);
> > > > > + /* We can send next packet immediately, so just call txdone. */
> > > > > + mbox_client_txdone(client->chan, 0);
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +EXPORT_SYMBOL(cmdq_pkt_flush_async);
> > > > > +
> > > > > +struct cmdq_flush_completion {
> > > > > + struct completion cmplt;
> > > > > + bool err;
> > > > > +};
> > > > > +
> > > > > +static void cmdq_pkt_flush_cb(struct cmdq_cb_data data)
> > > > > +{
> > > > > + struct cmdq_flush_completion *cmplt = data.data;
> > > > > +
> > > > > + cmplt->err = data.err;
> > > > > + complete(&cmplt->cmplt);
> > > > > +}
> > > > > +
> > > > > +int cmdq_pkt_flush(struct cmdq_client *client, struct cmdq_pkt *pkt)
> > > > > +{
> > > > > + struct cmdq_flush_completion cmplt;
> > > > > + int err;
> > > > > +
> > > > > + init_completion(&cmplt.cmplt);
> > > > > + err = cmdq_pkt_flush_async(client, pkt, cmdq_pkt_flush_cb, &cmplt);
> > > > > + if (err < 0)
> > > > > + return err;
> > > > > + wait_for_completion(&cmplt.cmplt);
> > > > > +
> > > > > + return cmplt.err ? -EFAULT : 0;
> > > > > +}
> > > > > +EXPORT_SYMBOL(cmdq_pkt_flush);
> > > >
> > > > [...]
> > > >
> > > >
> > >
> > >
> >
> >
>
>


\
 
 \ /
  Last update: 2018-07-04 04:40    [W:0.171 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site