[lkml]   [2018]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/4] Add support for MSCC Ocelot SPI

The MSCC MIPS SoC line uses a designware IP for the SPI controller but
still requires some special handling to give control of the SPI
interface to the IP and also has a specific handling for the chip

Changes in v2:
- Removed already applied patches
- separated DT binding changes from the driver patch

Alexandre Belloni (4):
dt-bindings: spi: snps,dw-apb-ssi: document Microsemi integration
spi: dw-mmio: add MSCC Ocelot support
mips: dts: mscc: Add spi on Ocelot
mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123

arch/mips/boot/dts/mscc/ocelot.dtsi | 11 +++
arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 10 +++
drivers/spi/spi-dw-mmio.c | 91 +++++++++++++++++++++++
3 files changed, 112 insertions(+)


 \ /
  Last update: 2018-07-27 14:06    [W:0.060 / U:3.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site