Messages in this thread Patch in this message | | | From | Robin Gong <> | Subject | RE: [PATCH v8 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler | Date | Fri, 27 Jul 2018 09:32:02 +0000 |
| |
> -----Original Message----- > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > Sent: 2018年7月26日 17:22 > To: Shawn Guo <shawnguo@kernel.org>; Mark Brown <broonie@kernel.org>; > Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Cc: Oleksij Rempel <o.rempel@pengutronix.de>; kernel@pengutronix.de; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-clk@vger.kernel.org; linux-kernel@vger.kernel.org; Andrew Morton > <akpm@linux-foundation.org>; Liam Girdwood <lgirdwood@gmail.com>; > Leonard Crestez <leonard.crestez@nxp.com>; Rob Herring > <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>; Michael > Turquette <mturquette@baylibre.com>; Stephen Boyd > <sboyd@codeaurora.org>; Fabio Estevam <fabio.estevam@nxp.com>; Russell > King <linux@armlinux.org.uk>; dl-linux-imx <linux-imx@nxp.com>; Robin Gong > <yibin.gong@nxp.com>; A.s. Dong <aisheng.dong@nxp.com> > Subject: [PATCH v8 5/6] regulator: pfuze100-regulator: provide > pm_power_off_prepare handler > > On some boards the SoC can use one pin "PMIC_STBY_REQ" to notify th PMIC > about state changes. In this case internal state of PMIC must be preconfigured > for upcomming state change. > It works fine with the current regulator framework, except with the power-off > case. > > This patch is providing an optional pm_power_off_prepare handler which will > configure standby state of the PMIC to disable all power lines. > > In my power consumption test on RIoTBoard, I got the following results: > power off without this patch: 320 mA > power off with this patch: 2 mA > suspend to ram: 40 mA > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > drivers/regulator/pfuze100-regulator.c | 92 ++++++++++++++++++++++++++ > 1 file changed, 92 insertions(+) > > diff --git a/drivers/regulator/pfuze100-regulator.c > b/drivers/regulator/pfuze100-regulator.c > index 8d9dbcc775ea..e386e9acb3f7 100644 > --- a/drivers/regulator/pfuze100-regulator.c > +++ b/drivers/regulator/pfuze100-regulator.c > @@ -15,6 +15,7 @@ > #include <linux/regulator/pfuze100.h> > #include <linux/i2c.h> > #include <linux/slab.h> > +#include <linux/kallsyms.h> Is it necessary? > #include <linux/regmap.h> > > #define PFUZE_NUMREGS 128 > @@ -29,11 +30,17 @@ > > #define PFUZE100_COINVOL 0x1a > #define PFUZE100_SW1ABVOL 0x20 > +#define PFUZE100_SW1ABMODE 0x23 > #define PFUZE100_SW1CVOL 0x2e > +#define PFUZE100_SW1CMODE 0x31 > #define PFUZE100_SW2VOL 0x35 > +#define PFUZE100_SW2MODE 0x38 > #define PFUZE100_SW3AVOL 0x3c > +#define PFUZE100_SW3AMODE 0x3f > #define PFUZE100_SW3BVOL 0x43 > +#define PFUZE100_SW3BMODE 0x46 > #define PFUZE100_SW4VOL 0x4a > +#define PFUZE100_SW4MODE 0x4d > #define PFUZE100_SWBSTCON1 0x66 > #define PFUZE100_VREFDDRCON 0x6a > #define PFUZE100_VSNVSVOL 0x6b > @@ -44,6 +51,13 @@ > #define PFUZE100_VGEN5VOL 0x70 > #define PFUZE100_VGEN6VOL 0x71 > > +#define PFUZE100_SWxMODE_MASK 0xf > +#define PFUZE100_SWxMODE_APS_APS 0x8 > +#define PFUZE100_SWxMODE_APS_OFF 0x4 > + > +#define PFUZE100_VGENxLPWR BIT(6) > +#define PFUZE100_VGENxSTBY BIT(5) > + > enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 }; > > struct pfuze_regulator { > @@ -492,6 +506,69 @@ static inline struct device_node *match_of_node(int > index) } #endif > > +static struct pfuze_chip *syspm_pfuze_chip; > + > +static void pfuze_power_off_prepare(void) > + dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power > +off"); Add 'if (syspm_pfuze_chip ->chip_id == PFUZE100))' here is easy for extend Support on pfuze200/3000.. in the feature. > + > + /* Switch from default mode: APS/APS to APS/Off */ > + regmap_update_bits(syspm_pfuze_chip->regmap, > PFUZE100_SW1ABMODE, > + PFUZE100_SWxMODE_MASK, > PFUZE100_SWxMODE_APS_OFF); > + regmap_update_bits(syspm_pfuze_chip->regmap, > PFUZE100_SW1CMODE, > + PFUZE100_SWxMODE_MASK, > PFUZE100_SWxMODE_APS_OFF); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE, > + PFUZE100_SWxMODE_MASK, > PFUZE100_SWxMODE_APS_OFF); > + regmap_update_bits(syspm_pfuze_chip->regmap, > PFUZE100_SW3AMODE, > + PFUZE100_SWxMODE_MASK, > PFUZE100_SWxMODE_APS_OFF); > + regmap_update_bits(syspm_pfuze_chip->regmap, > PFUZE100_SW3BMODE, > + PFUZE100_SWxMODE_MASK, > PFUZE100_SWxMODE_APS_OFF); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE, > + PFUZE100_SWxMODE_MASK, > PFUZE100_SWxMODE_APS_OFF); > + > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL, > + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, > + PFUZE100_VGENxSTBY); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL, > + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, > + PFUZE100_VGENxSTBY); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL, > + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, > + PFUZE100_VGENxSTBY); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL, > + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, > + PFUZE100_VGENxSTBY); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL, > + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, > + PFUZE100_VGENxSTBY); > + regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL, > + PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY, > + PFUZE100_VGENxSTBY); > +} > + > +static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip) > +{ > + if (pfuze_chip->chip_id != PFUZE100) { > + dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare > handler for not supported chip\n"); > + return -ENODEV; > + } > + > + if (pm_power_off_prepare) { > + dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already > registered.\n"); > + return -EBUSY; > + } > + > + if (syspm_pfuze_chip) { > + dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n"); > + return -EBUSY; > + } > + > + syspm_pfuze_chip = pfuze_chip; > + pm_power_off_prepare = pfuze_power_off_prepare; > + > + return 0; > +} > + > static int pfuze_identify(struct pfuze_chip *pfuze_chip) { > unsigned int value; > @@ -661,6 +738,20 @@ static int pfuze100_regulator_probe(struct i2c_client > *client, > } > } > > + if (of_property_read_bool(client->dev.of_node, > + "fsl,pmic-stby-poweroff")) > + return pfuze_power_off_prepare_init(pfuze_chip); > + > + return 0; > +} > + > +static int pfuze100_regulator_remove(struct i2c_client *client) { > + if (syspm_pfuze_chip) { > + syspm_pfuze_chip = NULL; > + pm_power_off_prepare = NULL; > + } > + > return 0; > } > > @@ -671,6 +762,7 @@ static struct i2c_driver pfuze_driver = { > .of_match_table = pfuze_dt_ids, > }, > .probe = pfuze100_regulator_probe, > + .remove = pfuze100_regulator_remove, > }; > module_i2c_driver(pfuze_driver); > > -- > 2.18.0
| |