lkml.org 
[lkml]   [2018]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] pinctrl: nuvoton: add driver for NPCM7xx
Date
This patch set adds pinmux and GPIO controller for the Nuvoton
NPCM750/730/715/705 Baseboard Management Controller (BMC).

The Nuvoton BMC NPCM750/730/715/705 Pinmux functions accessible
only for pin groups and pinconf parameters available only for
individual pins.

The Nuvoton BMC NPCM750/730/715/705 has eight identical GPIO
modules, each module has 32 GPIO ports.

Most of the GPIO ports are multiplexed with other system functions.

The NPCM7xx pinctrl and GPIO driver tested on NPCM750 evaluation board.

Addressed comments from:.
- Linus Walleij: https://www.spinics.net/lists/devicetree/msg239043.html

Changes since version 2:
- Using GPIO_GENERIC (mmio).
- Add Kconfig MFD_SYSCON dependency.
- Remove unnecessary code from the direction output function.
- dt-binding documentation haven't changed.

Changes since version 1:
- Remove Kconfig MFD_SYSCON dependency.
- Modify setfunc function.
- Modify dt-binding documentation according Rob comments.

Tomer Maimon (2):
dt-binding: pinctrl: Add NPCM7xx pinctrl and GPIO documentation
pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver

.../bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt | 216 ++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/nuvoton/Kconfig | 13 +
drivers/pinctrl/nuvoton/Makefile | 4 +
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 2127 ++++++++++++++++++++
6 files changed, 2362 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
create mode 100644 drivers/pinctrl/nuvoton/Kconfig
create mode 100644 drivers/pinctrl/nuvoton/Makefile
create mode 100644 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c

--
2.14.1

\
 
 \ /
  Last update: 2018-07-27 01:22    [W:0.048 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site