lkml.org 
[lkml]   [2018]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 27/35] mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()
On Sun, 22 Jul 2018 08:44:32 +0200
Boris Brezillon <boris.brezillon@bootlin.com> wrote:

> On Fri, 20 Jul 2018 17:15:19 +0200
> Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>
> > Two helpers have been added to the core to make ECC-related
> > configuration between the detection phase and the final NAND scan. Use
> > these hooks and convert the driver to just use nand_scan_with_ids()
> > (alternative to nand_scan() for passing a flash IDs table) instead of
> > both nand_scan_ident() and nand_scan_tail().
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
>
> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
>
> > ---
> > drivers/mtd/nand/raw/sm_common.c | 39 +++++++++++++++++++++++++--------------
> > 1 file changed, 25 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/mtd/nand/raw/sm_common.c b/drivers/mtd/nand/raw/sm_common.c
> > index 7f5044a79f01..d05e3f976a5e 100644
> > --- a/drivers/mtd/nand/raw/sm_common.c
> > +++ b/drivers/mtd/nand/raw/sm_common.c
> > @@ -160,19 +160,9 @@ static struct nand_flash_dev nand_xd_flash_ids[] = {
> > {NULL}
> > };
> >
> > -int sm_register_device(struct mtd_info *mtd, int smartmedia)
> > +static int sm_attach_chip(struct nand_chip *chip)
> > {
> > - struct nand_chip *chip = mtd_to_nand(mtd);
> > - int ret;
> > -
> > - chip->options |= NAND_SKIP_BBTSCAN;
> > -
> > - /* Scan for card properties */
> > - ret = nand_scan_ident(mtd, 1, smartmedia ?
> > - nand_smartmedia_flash_ids : nand_xd_flash_ids);
> > -
> > - if (ret)
> > - return ret;
> > + struct mtd_info *mtd = nand_to_mtd(chip);
> >
> > /* Bad block marker position */
> > chip->badblockpos = 0x05;
> > @@ -187,12 +177,33 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
> > else
> > return -ENODEV;
> >
> > - ret = nand_scan_tail(mtd);
> > + return 0;
> > +}
> >
> > +static const struct nand_controller_ops sm_controller_ops = {
> > + .attach_chip = sm_attach_chip,
> > +};
> > +
> > +int sm_register_device(struct mtd_info *mtd, int smartmedia)
> > +{
> > + struct nand_chip *chip = mtd_to_nand(mtd);
> > + struct nand_flash_dev *flash_ids;
> > + int ret;
> > +
> > + chip->options |= NAND_SKIP_BBTSCAN;
> > +
> > + /* Scan for card properties */
> > + chip->dummy_controller.ops = &sm_controller_ops;
> > + flash_ids = smartmedia ? nand_smartmedia_flash_ids : nand_xd_flash_ids;
> > + ret = nand_scan_with_ids(mtd, 1, flash_ids);
> > if (ret)
> > return ret;
> >
> > - return mtd_device_register(mtd, NULL, 0);
> > + ret = mtd_device_register(mtd, NULL, 0);
> > + if (ret)
> > + nand_release(mtd);

Didn't notice that while reviewing, but it would have been better to
use nand_cleanup() and do this change separately.

> > +
> > + return ret;
> > }
> > EXPORT_SYMBOL_GPL(sm_register_device);
> >
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

\
 
 \ /
  Last update: 2018-07-26 21:08    [W:0.543 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site