lkml.org 
[lkml]   [2018]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] Remove cd-inverted property for STM32Fx boards
Date
From: Patrice Chotard <patrice.chotard@st.com>

This series remove cd-inverted property from STM32Fx boards DT files.
As GPIOS are used for card detect, the polarity can be indicated using
GPIO_ACTIVE_(HIGH|LOW), so cd-inverted becomes useless.

Patrice Chotard (4):
ARM: dts: stm32: Remove cd-inverted property for stm32429i-eval
ARM: dts: stm32: Remove cd-inverted property for stm32f469-disco
ARM: dts: stm32: Remove cd-inverted property for stm32f769-disco
ARM: dts: stm32: Remove cd-inverted property for stm32f746-disco

arch/arm/boot/dts/stm32429i-eval.dts | 3 +--
arch/arm/boot/dts/stm32f469-disco.dts | 3 +--
arch/arm/boot/dts/stm32f746-disco.dts | 3 +--
arch/arm/boot/dts/stm32f769-disco.dts | 3 +--
4 files changed, 4 insertions(+), 8 deletions(-)

--
1.9.1

\
 
 \ /
  Last update: 2018-07-26 09:22    [W:0.991 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site