lkml.org 
[lkml]   [2018]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: spi: add DT bindings for UniPhier SPI controller
Date
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

Add DT bindings for SPI controller implemented in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
---
.../devicetree/bindings/spi/spi-uniphier.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-uniphier.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
new file mode 100644
index 0000000..504a4ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -0,0 +1,22 @@
+Socionext UniPhier SPI controller driver
+
+UniPhier SoCs have SCSSI which supports SPI single channel.
+
+Required properties:
+ - compatible: should be "socionext,uniphier-scssi"
+ - reg: address and length of the spi master registers
+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt
+ - clocks: A phandle to the clock for the device.
+ - resets: A phandle to the reset control for the device.
+
+Example:
+
+spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ reg = <0x54006000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+};
--
2.7.4
\
 
 \ /
  Last update: 2018-07-26 09:10    [W:0.115 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site