lkml.org 
[lkml]   [2018]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] media: usb: pwc: Don't use coherent DMA buffers for ISO transfer
2018-07-24 23:55 GMT+03:00 Alan Stern <stern@rowland.harvard.edu>:
> On Tue, 24 Jul 2018, Matwey V. Kornilov wrote:
>
>> 2018-07-23 21:57 GMT+03:00 Alan Stern <stern@rowland.harvard.edu>:
>> > On Mon, 23 Jul 2018, Matwey V. Kornilov wrote:
>> >
>> >> I've tried to strategies:
>> >>
>> >> 1) Use dma_unmap and dma_map inside the handler (I suppose this is
>> >> similar to how USB core does when there is no URB_NO_TRANSFER_DMA_MAP)
>> >
>> > Yes.
>> >
>> >> 2) Use sync_cpu and sync_device inside the handler (and dma_map only
>> >> once at memory allocation)
>> >>
>> >> It is interesting that dma_unmap/dma_map pair leads to the lower
>> >> overhead (+1us) than sync_cpu/sync_device (+2us) at x86_64 platform.
>> >> At armv7l platform using dma_unmap/dma_map leads to ~50 usec in the
>> >> handler, and sync_cpu/sync_device - ~65 usec.
>> >>
>> >> However, I am not sure is it mandatory to call
>> >> dma_sync_single_for_device for FROM_DEVICE direction?
>> >
>> > According to Documentation/DMA-API-HOWTO.txt, the CPU should not write
>> > to a DMA_FROM_DEVICE-mapped area, so dma_sync_single_for_device() is
>> > not needed.
>>
>> Well, I measured the following at armv7l. The handler execution time
>> (URB_NO_TRANSFER_DMA_MAP is used for all cases):
>>
>> 1) coherent DMA: ~3000 usec (pwc is not functional)
>> 2) explicit dma_unmap and dma_map in the handler: ~52 usec
>> 3) explicit dma_sync_single_for_cpu (no dma_sync_single_for_device): ~56 usec
>>
>> So, I suppose that unfortunately Tomasz suggestion doesn't work. There
>> is no performance improvement when dma_sync_single is used.
>>
>> At x86_64 the following happens:
>>
>> 1) coherent DMA: ~2 usec
>> 2) explicit dma_unmap and dma_map in the handler: ~3.5 usec
>> 3) explicit dma_sync_single_for_cpu (no dma_sync_single_for_device): ~4 usec
>>
>> So, whats to do next? Personally, I think that DMA streaming API
>> introduces not so great overhead.
>> Does anybody happy with turning to streaming DMA or I'll introduce
>> module-level switch as Ezequiel suggested?
>
> How about using the dma_unmap and dma_map calls in the USB core? If
> they add the same overhead as putting them in the handler, I think it
> would be acceptable for x86_64.

Sure, that is the simplest way to implement streaming API.

>
> It certainly is odd that the dma_sync_single APIs take longer than
> simply mapping and unmapping.

Well. I am surprised too. Probably, it is related to that only 9560
bytes are used for each URB. It is only three memory pages.

>
> Alan Stern
>



--
With best regards,
Matwey V. Kornilov.
Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
119234, Moscow, Universitetsky pr-k 13, +7 (495) 9392382

\
 
 \ /
  Last update: 2018-07-25 15:48    [W:0.138 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site