lkml.org 
[lkml]   [2018]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 09/10] mmc: tegra: Perform pad calibration after voltage switch
From
Date


On 24.07.2018 17:34, Aapo Vienamo wrote:
> Run the automatic pad calibration after voltage switching if
> tegra_host->pad_calib_required is set.
>
> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
> ---
> drivers/mmc/host/sdhci-tegra.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 78781bd..529aa4e7 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -537,6 +537,8 @@ static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc,
> struct mmc_ios *ios)
> {
> struct sdhci_host *host = mmc_priv(mmc);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
> int ret = 0;
>
> if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> @@ -551,6 +553,9 @@ static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc,
> ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage);
> }
>
> + if (tegra_host->pad_calib_required)
> + tegra_sdhci_pad_autocalib(host);

What if the autocalibration fails? Should we return an error?

> +
> return ret;
> }
>
>

\
 
 \ /
  Last update: 2018-07-25 09:26    [W:0.134 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site