lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/2] cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
From
Date
Hello Viresh,

Thanks for your review comments.

On 7/18/2018 11:16 AM, Viresh Kumar wrote:
> On 18-07-18, 11:07, Taniya Das wrote:
>> +static int qcom_cpu_resources_init(struct platform_device *pdev,
>> + struct device_node *np, unsigned int cpu,
>> + unsigned long xo_rate)
>> +{
>> + struct cpufreq_qcom *c;
>> + struct resource res;
>> + struct device *dev = &pdev->dev;
>> + const u16 *offsets;
>> + cpumask_t cpus_related;
>> + int ret, i, cpu_r;
>> + void __iomem *base;
>> +
>> + cpumask_clear(&cpus_related);
>> +
>> + ret = qcom_get_related_cpus(np, &cpus_related);
>> + if (ret) {
>> + dev_err(dev, "%s failed to get related CPUs\n", np->name);
>> + return ret;
>> + }
>> +
>> + /* Related CPUs */
>> + cpu_r = cpumask_first(&cpus_related);
>> + if (cpu != cpu_r) {
>> + qcom_freq_domain_map[cpu] = qcom_freq_domain_map[cpu_r];
>> + return 0;
>> + }
>> +
>> + c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
>> + if (!c)
>> + return -ENOMEM;
>> +
>> + offsets = of_device_get_match_data(&pdev->dev);
>> + if (!offsets)
>> + return -EINVAL;
>> +
>> + if (of_address_to_resource(np, 0, &res))
>> + return -ENOMEM;
>> +
>> + base = devm_ioremap_resource(dev, &res);
>> + if (!base)
>> + return -ENOMEM;
>> +
>> + for (i = REG_ENABLE; i < REG_ARRAY_SIZE; i++)
>> + c->reg_bases[i] = base + offsets[i];
>> +
>> + /* HW should be in enabled state to proceed */
>> + if (!(readl_relaxed(c->reg_bases[REG_ENABLE]) & 0x1)) {
>> + dev_err(dev, "%s cpufreq hardware not enabled\n", np->name);
>> + return -ENODEV;
>> + }
>> +
>> + cpumask_copy(&c->related_cpus, &cpus_related);
>> +
>> + c->max_cores = cpumask_weight(&c->related_cpus);
>> + if (!c->max_cores)
>> + return -ENOENT;
>> +
>> + c->xo_rate = xo_rate;
>> +
>> + ret = qcom_cpufreq_hw_read_lut(pdev, c);
>> + if (ret) {
>> + dev_err(dev, "%s failed to read LUT\n", np->name);
>> + return ret;
>> + }
>> +
>> + qcom_freq_domain_map[cpu] = c;
>
> Set this for all related CPUs here and then the check at the top of
> this routine will be simply:
>
> if (qcom_freq_domain_map[cpu])
> return 0;
>

Please check the latest series, I have updated the code.

>> +
>> + return 0;
>> +}
>> +

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--

\
 
 \ /
  Last update: 2018-07-24 12:45    [W:0.054 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site