lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] iommu/arm-smmu: Error out only if not enough context interrupts
From
Date
Hi Will,


On 7/24/2018 2:06 PM, Will Deacon wrote:
> On Thu, Jul 19, 2018 at 11:23:56PM +0530, Vivek Gautam wrote:
>> Currently we check if the number of context banks is not equal to
>> num_context_interrupts. However, there are booloaders such as, one
>> on sdm845 that reserves few context banks and thus kernel views
>> less than the total available context banks.
>> So, although the hardware definition in device tree would mention
>> the correct number of context interrupts, this number can be
>> greater than the number of context banks visible to smmu in kernel.
>> We should therefore error out only when the number of context banks
>> is greater than the available number of context interrupts.
>>
>> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
>> Suggested-by: Tomasz Figa <tfiga@chromium.org>
>> Cc: Robin Murphy <robin.murphy@arm.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>> ---
>> drivers/iommu/arm-smmu.c | 19 +++++++++++++------
>> 1 file changed, 13 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>> index 7c69736a30f8..4cb53bf4f423 100644
>> --- a/drivers/iommu/arm-smmu.c
>> +++ b/drivers/iommu/arm-smmu.c
>> @@ -2229,12 +2229,19 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>> if (err)
>> return err;
>>
>> - if (smmu->version == ARM_SMMU_V2 &&
>> - smmu->num_context_banks != smmu->num_context_irqs) {
>> - dev_err(dev,
>> - "found only %d context interrupt(s) but %d required\n",
>> - smmu->num_context_irqs, smmu->num_context_banks);
>> - return -ENODEV;
>> + if (smmu->version == ARM_SMMU_V2) {
>> + if (smmu->num_context_banks > smmu->num_context_irqs) {
>> + dev_err(dev,
>> + "found only %d context irq(s) but %d required\n",
>> + smmu->num_context_irqs, smmu->num_context_banks);
>> + return -ENODEV;
>> + } else if (smmu->num_context_banks < smmu->num_context_irqs) {
>> + /* loose extra context interrupts */
>> + dev_notice(dev,
>> + "found %d context irq(s) but only %d required\n",
>> + smmu->num_context_irqs, smmu->num_context_banks);
>> + smmu->num_context_irqs = smmu->num_context_banks;
>> + }
> I don't see the utility in the new message. Can you simplify with the patch
> below on top? It's a bit weird that we only decide to ignore the extra irqs
> after calling platform_get_irq() on them, but that seems to be harmless.

Thanks. I will modify as suggested below and respin.

Best regards
Vivek

>
> Will
>
> --->8
>
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index aa46c1ed5bf9..5349e22b5c78 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -2109,13 +2109,10 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
> "found only %d context irq(s) but %d required\n",
> smmu->num_context_irqs, smmu->num_context_banks);
> return -ENODEV;
> - } else if (smmu->num_context_banks < smmu->num_context_irqs) {
> - /* loose extra context interrupts */
> - dev_notice(dev,
> - "found %d context irq(s) but only %d required\n",
> - smmu->num_context_irqs, smmu->num_context_banks);
> - smmu->num_context_irqs = smmu->num_context_banks;
> }
> +
> + /* Ignore superfluous interrupts */
> + smmu->num_context_irqs = smmu->num_context_banks;
> }
>
> for (i = 0; i < smmu->num_global_irqs; ++i) {
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2018-07-24 11:40    [W:0.109 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site